lkml.org 
[lkml]   [2017]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers: pci: Add in description of pci_set_power_state
On Wed, Aug 02, 2017 at 08:42:18PM +0100, Piotr Gregor wrote:
> Add two reasons of returning 0 value to the description
> of the pci_set_power_state to include the cases when:
>
> - the transition is to D1 or D2 but D1 and D2 are not supported
> - the transition is to D3 but D3 is not supported.
>
> Signed-off-by: Piotr Gregor <piotrgregor@rsyncme.org>

Applied to pci/pm for v4.14, thanks!

> ---
> drivers/pci/pci.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index af0cc34..9528781 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -892,7 +892,9 @@ EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
> * -EINVAL if the requested state is invalid.
> * -EIO if device does not support PCI PM or its PM capabilities register has a
> * wrong version, or device doesn't support the requested state.
> + * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
> * 0 if device already is in the requested state.
> + * 0 if the transition is to D3 but D3 is not supported.
> * 0 if device's power state has been successfully changed.
> */
> int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
> --
> 2.1.4
>

\
 
 \ /
  Last update: 2017-08-04 01:15    [W:0.038 / U:1.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site