lkml.org 
[lkml]   [2017]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display
    From
    Date

    Den 03.08.2017 19.11, skrev Andy Shevchenko:
    > On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
    > <andy.shevchenko@gmail.com> wrote:
    >> On Thu, Aug 3, 2017 at 6:18 PM, David Lechner <david@lechnology.com> wrote:
    >>
    >>> The particular display I have is this one:
    >>> http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/
    >>>
    >>> It looks like it uses a command/data scheme like the MIPI displays, but
    >>> doesn't use any of the standard values for the commands. The controller can
    >>> do parallel, SPI and I2C, but the display I have is wired for I2C.
    >> It looks very similar to ssd1306. Some description refers to ssd1308.
    > http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf
    >

    That pdf refers to another one:
    http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/
    There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and ssd1309:
    https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt
    http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c
    Maybe the ssd1308 will work with that driver...

    Noralf.

    \
     
     \ /
      Last update: 2017-08-03 22:13    [W:2.417 / U:0.100 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site