Messages in this thread | | | Date | Thu, 3 Aug 2017 14:08:38 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v2 4/6] dt-bindings: usb: Add documentation for NS2 IDM USB3 |
| |
On Wed, Jul 26, 2017 at 06:56:25PM -0400, Jon Mason wrote: > Add documentation for IDM USB3 registers available in NS2 SoC > > Signed-off-by: Jon Mason <jon.mason@broadcom.com> > --- > Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt > > diff --git a/Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt b/Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt > new file mode 100644 > index 000000000000..3618dbcbe890 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt > @@ -0,0 +1,14 @@ > +Broadcom IDM USB3 registers > + > +Required properties: > +- compatible: "brcm,usb3-idm" > +- reg: Base address and length of the USB registers > + > + > +Example: > + > +usb3_idm: idm@67000000 {
I'm assuming these are all some misc registers in addition to the USB controller? If this is the USB controller itself, then use generic node names for the DT spec.
Acked-by: Rob Herring <robh@kernel.org>
> + compatible = "brcm,usb3-idm"; > + reg = <0x67000000 0x2000>; > +}; > + > -- > 2.7.4 >
| |