lkml.org 
[lkml]   [2017]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v8 00/12] rk808: Add RK805 support
    Date
    change in v8:
    PATCH V8 1/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 2/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 3/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 4/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 5/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 6/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 7/12: add: Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
    PATCH V8 8/12: (1) Kconfig: update coding style
    (2) pinctrl-rk805.c: using #include <linux/gpio/driver.h>
    (3) pinctrl-rk805.c: inline data and open code it; remove FUNCTION_GROUP and PINGROUP macros definition
    PATCH V8 9/12: NO change in V8
    PATCH V8 10/12: apply tag: Acked-by: Linus Walleij <linus.walleij@linaro.org>
    PATCH V8 11/12: NO change in V8
    PATCH V8 12/12: (1) using semicolon after "output-high"
    (2) apply tag: Acked-by: Linus Walleij <linus.walleij@linaro.org>

    change in v7:
    PATCH V7 1/12: NO change in V7
    PATCH V7 2/12: NO change in V7
    PATCH V7 3/12: fix missing: Acked-by: Mark Brown <broonie@kernel.org>
    PATCH V7 4/12: NO change in V7
    PATCH V7 5/12: NO change in V7
    PATCH V7 6/12: NO change in V7
    PATCH V7 7/12: fix missing: Acked-by: Rob Herring <robh@kernel.org>
    PATCH V7 8/12: abandon drivers/gpio/gpio-rk805.c and add drivers/pinctrl/pinctrl-rk805.c
    PATCH V7 9/12: reset author and signed off with my english name
    reset MODULE_AUTHOR() with my english name
    replace devm_request_threaded_irq() with devm_request_any_context_irq()
    PATCH V7 10/12: replace 'gpio-rk805' with 'pinctrl-rk805' in struct mfd_cell rk805s[]
    PATCH V7 11/12: NO change in V7
    PATCH V7 12/12: dt-bindings: abandon gpio-rk805.txt and add pinctrl-rk805.txt

    change in v6:
    patch1~7 no changed in V6.
    add patch 8~12 for gpio and powerkey func for rk805.

    change in v5:
    PATCH V5 1/7: NO change in V5
    PATCH V5 2/7: fix the rk805 reg addr in numerical order
    PATCH V5 3/7: NO change in V5
    PATCH V5 4/7: fix up the rk805_device_shutdown func
    PATCH V5 5/7: NO change in V5
    PATCH V5 6/7: NO change in V5
    PATCH V5 7/7: fix up the description of the rk805

    change in v4:
    PATCH V4 1/7: NO change in V4
    PATCH V4 2/7: rename the commit message
    PATCH V4 3/7: NO change in V4
    PATCH V4 4/7: Split this patch up into subsystems patch 5/7 6/7
    PATCH V4 5/7: new added
    PATCH V4 6/7: new added
    PATCH V4 7/7: NO change in V4


    change in V3:
    PATCH V3 1/5: NO change in V3
    PATCH V3 2/5: add rk805 RTC INT MASK define
    PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
    use rk805_regs_ops and rk805_switch_ops
    PATCH V3 4/5: fix up the shutdown func
    use pm_shutdown_prepare_fn to prepare shutdown
    and pm_pwroff_fn pull down gpio to shut down rk805
    it will update in the future(after rk808 support gpio func)
    PATCH V3 5/5: NO change in V3

    change in V2:
    PATCH V2 1/5: NO change in V2
    PATCH V2 2/5: add rk805 BUCK ILMAX define
    PATCH V2 3/5: NO change in V2
    PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
    PATCH V2 5/5: Add RK805 device tree bindings document

    Elaine Zhang (7):
    mfd: rk808: fix up the chip id get failed
    mfd: rk808: add rk805 regs addr and ID
    regulator: rk808: Add regulator driver for RK805
    mfd: rk808: Add RK805 support
    clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
    rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808
    mfd: dt-bindings: Add RK805 device tree bindings document

    Joseph Chen (5):
    pinctrl: Add pinctrl driver for the RK805 PMIC
    Input: Add power key driver for Rockchip RK805 PMIC
    mfd: rk808: Add RK805 pinctrl support
    mfd: rk808: Add RK805 power key support
    pinctrl: dt-bindings: add bindings for Rockchip RK805 PMIC

    Documentation/devicetree/bindings/mfd/rk808.txt | 22 +-
    .../devicetree/bindings/pinctrl/pinctrl-rk805.txt | 63 +++
    drivers/clk/Kconfig | 4 +-
    drivers/input/misc/Kconfig | 6 +
    drivers/input/misc/Makefile | 1 +
    drivers/input/misc/rk805-pwrkey.c | 111 +++++
    drivers/mfd/Kconfig | 4 +-
    drivers/mfd/rk808.c | 147 +++++-
    drivers/pinctrl/Kconfig | 9 +
    drivers/pinctrl/Makefile | 1 +
    drivers/pinctrl/pinctrl-rk805.c | 493 +++++++++++++++++++++
    drivers/regulator/Kconfig | 4 +-
    drivers/regulator/rk808-regulator.c | 130 ++++++
    drivers/rtc/Kconfig | 4 +-
    include/linux/mfd/rk808.h | 121 +++++
    15 files changed, 1105 insertions(+), 15 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
    create mode 100644 drivers/input/misc/rk805-pwrkey.c
    create mode 100644 drivers/pinctrl/pinctrl-rk805.c

    --
    1.9.1


    \
     
     \ /
      Last update: 2017-08-03 14:22    [W:4.696 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site