Messages in this thread Patch in this message | | | From | Philipp Rossak <> | Subject | [PATCH 7/7] ARM: dts: sun8i: h3: Enable AP6212 BT on uart3 on Nanopi M1 Plus | Date | Wed, 30 Aug 2017 05:01:10 +0200 |
| |
From: Philipp Rossak <embed3d@gmail.com>
The BT side of the AP6212 WiFi/BT combo module is connected to uart3.
Enable BT on this board by enabling uart3 with using additionally the cts and rts pins.
Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 3054308..8c12419 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -49,6 +49,7 @@ aliases { ethernet0 = &emac; ethernet1 = &ap6212; + serial1 = &uart3; }; reg_gmac_3v3: gmac-3v3 { @@ -135,3 +136,9 @@ function = "gpio_out"; }; }; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + status = "okay"; +}; -- 2.7.4
| |