lkml.org 
[lkml]   [2017]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Qemu-devel] [PATCH v11 2/6] ACPI: Add APEI GHES Table Generation support
From
Date
Igor,
Thank you very much for your review and comments, I will check your comments in detail and reply to you.


On 2017/8/29 18:20, Igor Mammedov wrote:
> On Fri, 18 Aug 2017 22:23:43 +0800
> Dongjiu Geng <gengdongjiu@huawei.com> wrote:
>
>> This implements APEI GHES Table by passing the error CPER info
>> to the guest via a fw_cfg_blob. After a CPER info is recorded, an
>> SEA(Synchronous External Abort)/SEI(SError Interrupt) exception
>> will be injected into the guest OS.
>
> it's a bit complex patch/functionality so I've just mosty skimmed and
> commented only on structure of the patch and changes I'd like to see
> so it would be more structured and review-able.
>
> I'd suggest to add doc patch first which will describe how it's
> supposed to work between QEMU/firmware/guest OS with expected
> flows.
>
>> Below is the table layout, the max number of error soure is 11,
>> which is classified by notification type.
>>
>> etc/acpi/tables etc/hardware_errors
>> ==================== ==========================================
>> + +--------------------------+ +------------------+
>> | | HEST | | address | +--------------+
>> | +--------------------------+ | registers | | Error Status |
>> | | GHES0 | | +----------------+ | Data Block 0 |
>> | +--------------------------+ +--------->| |status_address0 |------------->| +------------+
>> | | ................. | | | +----------------+ | | CPER |
>> | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER |
>> | | ................. | | | +----------------+ | | | .... |
>> | | read_ack_register--------+-+ | | ............. | | | | CPER |
>> | | read_ack_preserve | | | +------------------+ | | +-+------------+
>> | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status |
>> + +--------------------------+ | | | | +----------------+ | | | Data Block 1 |
>> | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+
>> + +--------------------------+ | | | +----------------+ | | | CPER |
>> | | ................. | | | +--->| | ack_value1 | | | | CPER |
>> | | error_status_address-----+---+ | | | +----------------+ | | | .... |
>> | | ................. | | | | | ............. | | | | CPER |
>> | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+
>> | | read_ack_preserve | | +->| | ack_value10 | | | |.......... |
>> | | read_ack_write | | | | +----------------+ | | +------------+
>> + +--------------------------| | | | | Error Status |
>> | | ............... | | | | | Data Block 10|
>> + +--------------------------+ | | +---->| +------------+
>> | | GHES10 | | | | | CPER |
>> + +--------------------------+ | | | | CPER |
>> | | ................. | | | | | .... |
>> | | error_status_address-----+-----+ | | | CPER |
>> | | ................. | | +-+------------+
>> | | read_ack_register--------+---------+
>> | | read_ack_preserve |
>> | | read_ack_write |
>> + +--------------------------+
> these diagram shows relations between tables which not necessarily bad
> but as layout it's useless.
> * Probably there is not much sense to have HEST table here, it's described
> well enough in spec. You might just put reference here.
> * these diagrams should go into doc/spec patch
> * when you describe layout you need to show what and at what offsets
> in which order in which blob/file is located. See ACPI spec for example
> and/or docs/specs/acpi_nvdimm.txt docs/specs/acpi_mem_hotplug.txt for inspiration.
>
>> For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register.
>> so user space must check the ack value to avoid read-write race condition.
>>
>> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
>> ---
>> hw/acpi/aml-build.c | 2 +
>> hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++
>> hw/arm/virt-acpi-build.c | 6 +
>> include/hw/acpi/aml-build.h | 1 +
>> include/hw/acpi/hest_ghes.h | 47 ++++++
>> 5 files changed, 401 insertions(+)
>> create mode 100644 hw/acpi/hest_ghes.c
>> create mode 100644 include/hw/acpi/hest_ghes.h
>>
>> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
>> index 36a6cc4..6849e5f 100644
>> --- a/hw/acpi/aml-build.c
>> +++ b/hw/acpi/aml-build.c
>> @@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>> tables->table_data = g_array_new(false, true /* clear */, 1);
>> tables->tcpalog = g_array_new(false, true /* clear */, 1);
>> tables->vmgenid = g_array_new(false, true /* clear */, 1);
>> + tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>> tables->linker = bios_linker_loader_init();
>> }
>>
>> @@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
>> g_array_free(tables->table_data, true);
>> g_array_free(tables->tcpalog, mfre);
>> g_array_free(tables->vmgenid, mfre);
>> + g_array_free(tables->hardware_errors, mfre);
>> }
>>
>> /* Build rsdt table */
>> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
>> new file mode 100644
>> index 0000000..ff6b5ef
>> --- /dev/null
>> +++ b/hw/acpi/hest_ghes.c
>> @@ -0,0 +1,345 @@
>> +/*
>> + * APEI GHES table Generation
>> + *
>> + * Copyright (C) 2017 huawei.
>> + *
>> + * Author: Dongjiu Geng <gengdongjiu@huawei.com>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +#include "qmp-commands.h"
>> +#include "hw/acpi/acpi.h"
>> +#include "hw/acpi/aml-build.h"
>> +#include "hw/acpi/hest_ghes.h"
>> +#include "hw/nvram/fw_cfg.h"
>> +#include "sysemu/sysemu.h"
>> +#include "qemu/error-report.h"
>> +
>> +/* The structure that stands for the layout
>> + * GHES_ERRORS_FW_CFG_FILE fw_cfg blob
>> + *
>> + * etc/hardware_errors
>> + * ==========================================
>> + * +------------------+
>> + * | address | +--------------+
>> + * | registers | | Error Status |
>> + * | +----------------+ | Data Block 0 |
>> + * | |status_address0 |------------->| +------------+
>> + * | +----------------+ | | CPER |
>> + * | |status_address1 |----------+ | | CPER |
>> + * | +----------------+ | | | .... |
>> + * | |............. | | | | CPER |
>> + * | +----------------+ | | +------------+
>> + * | |status_address10|-----+ | | Error Status |
>> + * | +----------------+ | | | Data Block 1 |
>> + * | |ack_value0 | | +-->| +------------+
>> + * | +----------------+ | | | CPER |
>> + * | |ack_value1 | | | | CPER |
>> + * | +----------------+ | | | .... |
>> + * | | ............. | | | | CPER |
>> + * | +----------------+ | +-+------------+
>> + * | |ack_value10 | | | |.......... |
>> + * | +----------------+ | | +------------+
>> + * | | Error Status |
>> + * | | Data Block10 |
>> + * +------->+------------+
>> + * | | CPER |
>> + * | | CPER |
>> + * | | .... |
>> + * | | CPER |
>> + * +-+------------+
>> + */
>> +struct hardware_errors_buffer {
>> + /* Generic Error Status Block register */
>> + uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED];
>> + uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED];
>> + char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED];
>> +};
>> +
>> +static int ghes_record_cper(uint64_t error_block_address,
>> + uint64_t error_physical_addr)
>> +{
>> + AcpiGenericErrorStatus block;
>> + AcpiGenericErrorData *gdata;
>> + UefiCperSecMemErr *mem_err;
>> + uint64_t current_block_length;
>> + unsigned char *buffer;
>> + /* memory section */
>> + char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE,
>> + 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C,
>> + 0x83, 0xB1};
>> +
>> + cpu_physical_memory_read(error_block_address, &block,
>> + sizeof(AcpiGenericErrorStatus));
>> +
>> + /* Get the current generic error status block length */
>> + current_block_length = sizeof(AcpiGenericErrorStatus) +
>> + le32_to_cpu(block.data_length);
>> +
>> + /* If the Generic Error Status Block is NULL, update
>> + * the block header
>> + */
>> + if (!block.block_status) {
>> + block.block_status = ACPI_GEBS_UNCORRECTABLE;
>> + block.error_severity = ACPI_CPER_SEV_RECOVERABLE;
>> + }
>> +
>> + block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData));
>> + block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr));
>> +
>> + /* check whether it runs out of the preallocated memory */
>> + if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) >
>> + GHES_MAX_RAW_DATA_LENGTH) {
>> + error_report("Record CPER out of boundary!!!");
>> + return GHES_CPER_FAIL;
>> + }
>> +
>> + /* Write back the Generic Error Status Block to guest memory */
>> + cpu_physical_memory_write(error_block_address, &block,
>> + sizeof(AcpiGenericErrorStatus));
>> +
>> + /* Fill in Generic Error Data Entry */
>> + buffer = g_malloc0(sizeof(AcpiGenericErrorData) +
>> + sizeof(UefiCperSecMemErr));
>> +
>> +
>> + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr));
> looks redundant, g_malloc0 does it for you
>
>> + gdata = (AcpiGenericErrorData *)buffer;
>> +
>> + /* Memory section */
>> + memcpy(&(gdata->section_type_le), &mem_section_id_le,
>> + sizeof(mem_section_id_le));
>> +
>> + /* error severity is recoverable */
>> + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE;
>> + gdata->revision = 0x300; /* the revision number is 0x300 */
>> + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr));
>> +
>> + mem_err = (UefiCperSecMemErr *) (gdata + 1);
>> +
>> + /* User space only handle the memory section CPER */
>> +
>> + /* Hard code to Multi-bit ECC error */
>> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE);
>> + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC);
>> +
>> + /* Record the physical address at which the memory error occurred */
>> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA);
>> + mem_err->physical_addr = cpu_to_le32(error_physical_addr);
>
> I'd prefer for you to use build_append_int_noprefix() API to compose
> whole error status block
>
> and try to get rid of most structures you introduce in patch 1/6,
> as they will be left unused after that.
>
>> +
>> + /* Write back the Generic Error Data Entry to guest memory */
>> + cpu_physical_memory_write(error_block_address + current_block_length,
>> + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr));
>> +
>> + g_free(buffer);
>> + return GHES_CPER_OK;
>> +}
>> +
>> +static void
>> +build_address(GArray *table_data, BIOSLinker *linker,
>> + uint32_t dst_patched_offset, uint32_t src_offset,
>> + uint8_t address_space_id , uint8_t register_bit_width,
>> + uint8_t register_bit_offset, uint8_t access_size)
>> +{
>> + uint32_t address_size = sizeof(struct AcpiGenericAddress) -
>> + offsetof(struct AcpiGenericAddress, address);
>> +
>> + /* Address space */
>> + build_append_int_noprefix(table_data, address_space_id, 1);
>> + /* register bit width */
>> + build_append_int_noprefix(table_data, register_bit_width, 1);
>> + /* register bit offset */
>> + build_append_int_noprefix(table_data, register_bit_offset, 1);
>> + /* access size */
>> + build_append_int_noprefix(table_data, access_size, 1);
>> + acpi_data_push(table_data, address_size);
>> +
>> + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM
>> + * can retrieve and read it. the address size is 64 bits.
>> + */
>> + bios_linker_loader_add_pointer(linker,
>> + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t),
>> + GHES_ERRORS_FW_CFG_FILE, src_offset);
>> +}
> It's mostly generic GAS structure with linker addition.
> I'd suggest to reuse something like
> https://github.com/imammedo/qemu/commit/3d2fd6d13a3ea298d2ee814835495ce6241d085c
> to build GAS and use bios_linker_loader_add_pointer() directly in ghes_build_acpi().
>
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> + BIOSLinker *linker)
>> +{
>> + uint32_t ghes_start = table_data->len;
>> + uint32_t address_size, error_status_address_offset;
>> + uint32_t read_ack_register_offset, i;
>> +
>> + address_size = sizeof(struct AcpiGenericAddress) -
>> + offsetof(struct AcpiGenericAddress, address);
> it's confusing name for var,
> AcpiGenericAddress::address is fixed unsigned 64 bit integer per spec
> also, I'm not sure why it's needed at all.
>
>> +
>> + error_status_address_offset = ghes_start +
>> + sizeof(AcpiHardwareErrorSourceTable) +
>> + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) +
>> + offsetof(struct AcpiGenericAddress, address);
>> +
>> + read_ack_register_offset = ghes_start +
>> + sizeof(AcpiHardwareErrorSourceTable) +
>> + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) +
>> + offsetof(struct AcpiGenericAddress, address);
> it's really hard to get why you use offsetof() so much in this function,
> to me above code totally unreadable.
>
>> + acpi_data_push(hardware_error,
>> + offsetof(struct hardware_errors_buffer, ack_value));
> it looks like you are trying to build several tables within one function,
> so it's hard to get what's going on.
> I'd suggest to build separate table independently where it's possible.
>
> i.e. build independent tables first
> and only then build dependent tables passing to it pointers
> to previously build table if necessary.
>
>> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++)
>> + /* Initialize read ack register */
>> + build_append_int_noprefix((void *)hardware_error, 1, 8);
>> +
>> + /* Reserved the total size for ERRORS fw_cfg blob
>> + */
>> + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer));
>> +
>> + /* Allocate guest memory for the Data fw_cfg blob */
>> + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error,
>> + 1, false);
>> + /* Reserve table header size */
>> + acpi_data_push(table_data, sizeof(AcpiTableHeader));
>> +
>> + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4);
> GHES_ACPI_HEST_NOTIFY_RESERVED - name doesn't actually tell what it is
> I'd suggest to use spec field name wit table prefix, ex:
> ACPI_HEST_ERROR_SOURCE_COUNT
>
> also, beside build_append_int_noprefix() you need to at least
> add comment that exactly matches field from spec.
>
> the same applies to other fields you are adding in this patch
>
>> +
>> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) {
>> + build_append_int_noprefix(table_data,
>> + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */
>> + /* source id */
>> + build_append_int_noprefix(table_data, cpu_to_le16(i), 2);
>> + /* related source id */
>> + build_append_int_noprefix(table_data, 0xffff, 2);
>> + build_append_int_noprefix(table_data, 0, 1); /* flags */
>> +
>> + /* Currently only enable SEA notification type to avoid the kernel
>> + * warning, reserve the space for other notification error source
>> + */
>> + if (i == ACPI_HEST_NOTIFY_SEA) {
>> + build_append_int_noprefix(table_data, 1, 1); /* enabled */
>> + } else {
>> + build_append_int_noprefix(table_data, 0, 1); /* enabled */
>> + }
>> +
>> + /* The number of error status block per generic hardware error source */
>> + build_append_int_noprefix(table_data, 1, 4);
>> + /* Max sections per record */
>> + build_append_int_noprefix(table_data, 1, 4);
>> + /* Max raw data length */
>> + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4);
>> +
>> + /* Build error status address*/
>> + build_address(table_data, linker, error_status_address_offset + i *
>> + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size,
>> + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */);
> just do something like this instead of build_address():
> build_append_gas()
> bios_linker_loader_add_pointer()
>
> also register width 0x40 looks suspicious, where does it come from?
> While at it do you have a real hardware which has HEST table that you re trying to model after?
> I'd like to see HEST and other related tables from it.
>
>> +
>> + /* Hardware error notification structure */
>> + build_append_int_noprefix(table_data, i, 1); /* type */
>> + /* length */
>> + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1);
>> + build_append_int_noprefix(table_data, 0, 26);
>> +
>> + /* Error Status Block Length */
>> + build_append_int_noprefix(table_data,
>> + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4);
>> +
>> + /* Build read ack register */
>> + build_address(table_data, linker, read_ack_register_offset + i *
>> + sizeof(AcpiGenericHardwareErrorSourceV2),
>> + offsetof(struct hardware_errors_buffer, ack_value) +
>> + i * address_size, AML_SYSTEM_MEMORY, 0x40, 0,
>> + 4 /* QWord access */);
>> +
>> + /* Read ack preserve */
>> + build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8);
>> +
>> + /* Read ack write */
>> + build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8);
>> + }
>> +
>> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++)
>> + /* Patch address of generic error status block into
>> + * the address register so OSPM can retrieve and read it.
>> + */
>> + bios_linker_loader_add_pointer(linker,
>> + GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size,
>> + GHES_ERRORS_FW_CFG_FILE,
>> + offsetof(struct hardware_errors_buffer, gesb) +
>> + i * GHES_MAX_RAW_DATA_LENGTH);
>> +
>> + /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob
>> + * so QEMU can write the ERRORS there. The address is expected to be
>> + * < 4GB, but write 64 bits anyway.
>> + */
>> + bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
>> + 0, address_size, GHES_ERRORS_FW_CFG_FILE,
>> + offsetof(struct hardware_errors_buffer, gesb));
>> +
>> + build_header(linker, table_data,
>> + (void *)(table_data->data + ghes_start), "HEST",
>> + table_data->len - ghes_start, 1, NULL, "GHES");
>> +}
>> +
>> +static GhesState ges;
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
>> +{
>> +
>> + size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH;
>> + size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size;
>> +
>> + /* Create a read-only fw_cfg file for GHES */
>> + fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
>> + size);
>> + /* Create a read-write fw_cfg file for Address */
>> + fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
>> + &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false);
>> +}
>> +
>> +bool ghes_update_guest(uint32_t notify, uint64_t physical_address)
>> +{
>> + uint64_t error_block_addr;
>> + uint64_t ack_value_addr, ack_value = 0;
>> + int loop = 0, ack_value_size;
>> + bool ret = GHES_CPER_FAIL;
>> +
>> + ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) -
>> + offsetof(struct hardware_errors_buffer, ack_value)) /
>> + GHES_ACPI_HEST_NOTIFY_RESERVED;
>> +
>> + if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) {
>> + error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH;
>> + error_block_addr = le32_to_cpu(error_block_addr);
>> +
>> + ack_value_addr = ges.ghes_addr_le -
>> + (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size;
>> +retry:
>> + cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size);
>> + if (!ack_value) {
>> + if (loop < 3) {
>> + usleep(100 * 1000);
>> + loop++;
>> + goto retry;
>> + } else {
>> + error_report("Last time OSPM does not acknowledge the error,"
>> + " record CPER failed this time, set the ack value to"
>> + " avoid blocking next time CPER record! exit");
>> + ack_value = 1;
>> + cpu_physical_memory_write(ack_value_addr,
>> + &ack_value, ack_value_size);
>> + return ret;
>> + }
>> + } else {
>> + /* A zero value in ghes_addr means that BIOS has not yet written
>> + * the address
>> + */
>> + if (error_block_addr) {
>> + ack_value = 0;
>> + cpu_physical_memory_write(ack_value_addr,
>> + &ack_value, ack_value_size);
>> + ret = ghes_record_cper(error_block_addr, physical_address);
>> + }
>> + }
>> + }
>> + return ret;
>> +}
>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index 3d78ff6..def1ec1 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -45,6 +45,7 @@
>> #include "hw/arm/virt.h"
>> #include "sysemu/numa.h"
>> #include "kvm_arm.h"
>> +#include "hw/acpi/hest_ghes.h"
>>
>> #define ARM_SPI_BASE 32
>> #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>> @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>> acpi_add_table(table_offsets, tables_blob);
>> build_spcr(tables_blob, tables->linker, vms);
>>
>> + acpi_add_table(table_offsets, tables_blob);
>> + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
>> +
>> if (nb_numa_nodes > 0) {
>> acpi_add_table(table_offsets, tables_blob);
>> build_srat(tables_blob, tables->linker, vms);
>> @@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms)
>> fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data,
>> acpi_data_len(tables.tcpalog));
>>
>> + ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>> +
>> build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>> ACPI_BUILD_RSDP_FILE, 0);
>>
>> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
>> index 88d0738..7f7b55c 100644
>> --- a/include/hw/acpi/aml-build.h
>> +++ b/include/hw/acpi/aml-build.h
>> @@ -211,6 +211,7 @@ struct AcpiBuildTables {
>> GArray *rsdp;
>> GArray *tcpalog;
>> GArray *vmgenid;
>> + GArray *hardware_errors;
>> BIOSLinker *linker;
>> } AcpiBuildTables;
>>
>> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
>> new file mode 100644
>> index 0000000..0772756
>> --- /dev/null
>> +++ b/include/hw/acpi/hest_ghes.h
>> @@ -0,0 +1,47 @@
>> +/*
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> +
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Authors:
>> + * Dongjiu Geng <gengdongjiu@huawei.com>
>> + *
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef ACPI_GHES_H
>> +#define ACPI_GHES_H
>> +
>> +#include "hw/acpi/bios-linker-loader.h"
>> +
>> +#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors"
>> +#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr"
>> +
>> +#define GHES_GAS_ADDRESS_OFFSET 4
>> +#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20
>> +#define GHES_NOTIFICATION_STRUCTURE 32
>> +
>> +#define GHES_CPER_OK 1
>> +#define GHES_CPER_FAIL 0
>> +
>> +#define GHES_ACPI_HEST_NOTIFY_RESERVED 11
>> +/* The max size in Bytes for one error block */
>> +#define GHES_MAX_RAW_DATA_LENGTH 0x1000
>> +
>> +
>> +typedef struct GhesState {
>> + uint64_t ghes_addr_le;
>> +} GhesState;
>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> + BIOSLinker *linker);
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors);
>> +bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr);
>> +#endif
>
>
> .
>

\
 
 \ /
  Last update: 2017-08-29 13:21    [W:0.146 / U:13.932 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site