lkml.org 
[lkml]   [2017]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
From
Date
On 8/14/2017 3:31 PM, Wolfram Sang wrote:
> On Mon, Aug 07, 2017 at 05:10:58PM -0400, Stephen Douthit wrote:
>> Hello all,
>>
>> We ran into an issue where the ipmi_ssif and i2c-ismt drivers don't
>> agree on the format for data returned by i2c_smbus_read_block_data()
>>
>> Looking at the traffic on the wire with a beagle analyzer:
>> -----
>> Packet Details (Values in hex; [S] = Start condition;
>> [P] = Stop condition; * = No Ack)
>> [S] <10:R> 12 1C 01 00 00 80 02 1C 02 8F BE 12 00 25 12 41 01 00 00* [P]
>> -----
>>
>> Looking at the matching kernel trace:
>> -----
>> kssif0010-759 [001] .... 1435.891090: smbus_read: i2c-0 a=010 f=0000 c=3 BLOCK_DATA
>> kssif0010-759 [001] .... 1436.202906: smbus_reply: i2c-0 a=010 f=0000 c=3 BLOCK_DATA l=20 [13-12-1c-01-00-00-80-02-1c-02-8f-be-12-00-25-12-41-01-00-00]
>> kssif0010-759 [001] .... 1436.202908: smbus_result: i2c-0 a=010 f=0000 c=3 BLOCK_DATA rd res=0
>> -----
>>
>> So basically the byte count already precedes the data in the dma_buffer,
>> then the driver sticks desc->rxbytes in front of this resulting in the
>> trace above.
>>
>> The first patch tackles this.
>>
>> The second patch in the series adds a sanity check on the byte count
>> supplied by the slave device. This might be a nice to have, but is
>> probably less critical.
>
> Both patches look good to me. Seth, Neil, do you agree?
>

Ping.

Not sure what the usual review time is, let me know if this is premature.

\
 
 \ /
  Last update: 2017-08-28 15:51    [W:3.124 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site