lkml.org 
[lkml]   [2017]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 08/20] rpmsg: glink: Introduce glink smem based transport
From
Date


On 8/24/2017 12:51 PM, Sricharan R wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The glink protocol supports different types of
> transports (shared memory). With the core protocol
> remaining the same, the way the transport's memory is
> probed and accessed is different. So add support for
> glink's smem based transports.
>
> Adding a new smem transport register function and the
> fifo accessors for the same.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>

Regards,
Arun N
> ---
> drivers/rpmsg/Kconfig | 10 ++
> drivers/rpmsg/Makefile | 1 +
> drivers/rpmsg/qcom_glink_native.c | 5 +
> drivers/rpmsg/qcom_glink_native.h | 1 +
> drivers/rpmsg/qcom_glink_smem.c | 311 ++++++++++++++++++++++++++++++++++++++
> include/linux/rpmsg/qcom_glink.h | 27 ++++
> 6 files changed, 355 insertions(+)
> create mode 100644 drivers/rpmsg/qcom_glink_smem.c
> create mode 100644 include/linux/rpmsg/qcom_glink.h
>
> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
> index ac33688..4bd9ba3 100644
> --- a/drivers/rpmsg/Kconfig
> +++ b/drivers/rpmsg/Kconfig
> @@ -27,6 +27,16 @@ config RPMSG_QCOM_GLINK_RPM
> which serves as a channel for communication with the RPM in GLINK
> enabled systems.
>
> +config RPMSG_QCOM_GLINK_SMEM
> + tristate "Qualcomm SMEM Glink driver"
> + select RPMSG_QCOM_GLINK_NATIVE
> + depends on HAS_IOMEM
> + depends on MAILBOX
> + help
> + Say y here to enable support for the GLINK SMEM communication driver,
> + which provides support for using the GLINK communication protocol
> + over SMEM.
> +
> config RPMSG_QCOM_SMD
> tristate "Qualcomm Shared Memory Driver (SMD)"
> depends on QCOM_SMEM
> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
> index 09a756c..c71f4ab 100644
> --- a/drivers/rpmsg/Makefile
> +++ b/drivers/rpmsg/Makefile
> @@ -2,5 +2,6 @@ obj-$(CONFIG_RPMSG) += rpmsg_core.o
> obj-$(CONFIG_RPMSG_CHAR) += rpmsg_char.o
> obj-$(CONFIG_RPMSG_QCOM_GLINK_RPM) += qcom_glink_rpm.o
> obj-$(CONFIG_RPMSG_QCOM_GLINK_NATIVE) += qcom_glink_native.o
> +obj-$(CONFIG_RPMSG_QCOM_GLINK_SMEM) += qcom_glink_smem.o
> obj-$(CONFIG_RPMSG_QCOM_SMD) += qcom_smd.o
> obj-$(CONFIG_RPMSG_VIRTIO) += virtio_rpmsg_bus.o
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index 21adde3..50a8008 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -1010,3 +1010,8 @@ void qcom_glink_native_remove(struct qcom_glink *glink)
> idr_destroy(&glink->rcids);
> mbox_free_channel(glink->mbox_chan);
> }
> +
> +void qcom_glink_native_unregister(struct qcom_glink *glink)
> +{
> + device_unregister(glink->dev);
> +}
> diff --git a/drivers/rpmsg/qcom_glink_native.h b/drivers/rpmsg/qcom_glink_native.h
> index d5627a4..197bb9d 100644
> --- a/drivers/rpmsg/qcom_glink_native.h
> +++ b/drivers/rpmsg/qcom_glink_native.h
> @@ -35,4 +35,5 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> struct qcom_glink_pipe *tx);
> void qcom_glink_native_remove(struct qcom_glink *glink);
>
> +void qcom_glink_native_unregister(struct qcom_glink *glink);
> #endif
> diff --git a/drivers/rpmsg/qcom_glink_smem.c b/drivers/rpmsg/qcom_glink_smem.c
> new file mode 100644
> index 0000000..19179a1
> --- /dev/null
> +++ b/drivers/rpmsg/qcom_glink_smem.c
> @@ -0,0 +1,311 @@
> +/*
> + * Copyright (c) 2016, Linaro Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/slab.h>
> +#include <linux/rpmsg.h>
> +#include <linux/idr.h>
> +#include <linux/circ_buf.h>
> +#include <linux/soc/qcom/smem.h>
> +#include <linux/sizes.h>
> +#include <linux/delay.h>
> +#include <linux/regmap.h>
> +#include <linux/workqueue.h>
> +#include <linux/list.h>
> +
> +#include <linux/delay.h>
> +#include <linux/rpmsg.h>
> +#include <linux/rpmsg/qcom_glink.h>
> +
> +#include "qcom_glink_native.h"
> +
> +#define FIFO_FULL_RESERVE 8
> +#define FIFO_ALIGNMENT 8
> +#define TX_BLOCKED_CMD_RESERVE 8 /* size of struct read_notif_request */
> +
> +#define SMEM_GLINK_NATIVE_XPRT_DESCRIPTOR 478
> +#define SMEM_GLINK_NATIVE_XPRT_FIFO_0 479
> +#define SMEM_GLINK_NATIVE_XPRT_FIFO_1 480
> +
> +struct glink_smem_pipe {
> + struct qcom_glink_pipe native;
> +
> + __le32 *tail;
> + __le32 *head;
> +
> + void *fifo;
> +
> + int remote_pid;
> +};
> +
> +#define to_smem_pipe(p) container_of(p, struct glink_smem_pipe, native)
> +
> +static size_t glink_smem_rx_avail(struct qcom_glink_pipe *np)
> +{
> + struct glink_smem_pipe *pipe = to_smem_pipe(np);
> + size_t len;
> + void *fifo;
> + u32 head;
> + u32 tail;
> +
> + if (!pipe->fifo) {
> + fifo = qcom_smem_get(pipe->remote_pid,
> + SMEM_GLINK_NATIVE_XPRT_FIFO_1, &len);
> + if (IS_ERR(fifo)) {
> + pr_err("failed to acquire RX fifo handle: %ld\n",
> + PTR_ERR(fifo));
> + return 0;
> + }
> +
> + pipe->fifo = fifo;
> + pipe->native.length = len;
> + }
> +
> + head = le32_to_cpu(*pipe->head);
> + tail = le32_to_cpu(*pipe->tail);
> +
> + if (head < tail)
> + return pipe->native.length - tail + head;
> + else
> + return head - tail;
> +}
> +
> +static void glink_smem_rx_peak(struct qcom_glink_pipe *np,
> + void *data, size_t count)
> +{
> + struct glink_smem_pipe *pipe = to_smem_pipe(np);
> + size_t len;
> + u32 tail;
> +
> + tail = le32_to_cpu(*pipe->tail);
> +
> + len = min_t(size_t, count, pipe->native.length - tail);
> + if (len) {
> + __ioread32_copy(data, pipe->fifo + tail,
> + len / sizeof(u32));
> + }
> +
> + if (len != count) {
> + __ioread32_copy(data + len, pipe->fifo,
> + (count - len) / sizeof(u32));
> + }
> +}
> +
> +static void glink_smem_rx_advance(struct qcom_glink_pipe *np,
> + size_t count)
> +{
> + struct glink_smem_pipe *pipe = to_smem_pipe(np);
> + u32 tail;
> +
> + tail = le32_to_cpu(*pipe->tail);
> +
> + tail += count;
> + if (tail > pipe->native.length)
> + tail -= pipe->native.length;
> +
> + *pipe->tail = cpu_to_le32(tail);
> +}
> +
> +static size_t glink_smem_tx_avail(struct qcom_glink_pipe *np)
> +{
> + struct glink_smem_pipe *pipe = to_smem_pipe(np);
> + u32 head;
> + u32 tail;
> + u32 avail;
> +
> + head = le32_to_cpu(*pipe->head);
> + tail = le32_to_cpu(*pipe->tail);
> +
> + if (tail <= head)
> + avail = pipe->native.length - head + tail;
> + else
> + avail = tail - head;
> +
> + if (avail < (FIFO_FULL_RESERVE + TX_BLOCKED_CMD_RESERVE))
> + avail = 0;
> + else
> + avail -= FIFO_FULL_RESERVE + TX_BLOCKED_CMD_RESERVE;
> +
> + return avail;
> +}
> +
> +static unsigned int glink_smem_tx_write_one(struct glink_smem_pipe *pipe,
> + unsigned int head,
> + const void *data, size_t count)
> +{
> + size_t len;
> +
> + len = min_t(size_t, count, pipe->native.length - head);
> + if (len)
> + memcpy(pipe->fifo + head, data, len);
> +
> + if (len != count)
> + memcpy(pipe->fifo, data + len, count - len);
> +
> + head += count;
> + if (head >= pipe->native.length)
> + head -= pipe->native.length;
> +
> + return head;
> +}
> +
> +static void glink_smem_tx_write(struct qcom_glink_pipe *glink_pipe,
> + const void *hdr, size_t hlen,
> + const void *data, size_t dlen)
> +{
> + struct glink_smem_pipe *pipe = to_smem_pipe(glink_pipe);
> + unsigned int head;
> +
> + head = le32_to_cpu(*pipe->head);
> +
> + head = glink_smem_tx_write_one(pipe, head, hdr, hlen);
> + head = glink_smem_tx_write_one(pipe, head, data, dlen);
> +
> + /* Ensure head is always aligned to 8 bytes */
> + head = ALIGN(head, 8);
> + if (head >= pipe->native.length)
> + head -= pipe->native.length;
> +
> + *pipe->head = cpu_to_le32(head);
> +}
> +
> +static void qcom_glink_smem_release(struct device *dev)
> +{
> + kfree(dev);
> +}
> +
> +struct qcom_glink *qcom_glink_smem_register(struct device *parent,
> + struct device_node *node)
> +{
> + struct glink_smem_pipe *rx_pipe;
> + struct glink_smem_pipe *tx_pipe;
> + struct qcom_glink *glink;
> + struct device *dev;
> + u32 remote_pid;
> + __le32 *descs;
> + size_t size;
> + int ret;
> +
> + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return ERR_PTR(-ENOMEM);
> +
> + dev->parent = parent;
> + dev->of_node = node;
> + dev->release = qcom_glink_smem_release;
> + dev_set_name(dev, "%s:%s", node->parent->name, node->name);
> + ret = device_register(dev);
> + if (ret) {
> + pr_err("failed to register glink edge\n");
> + return ERR_PTR(ret);
> + }
> +
> + ret = of_property_read_u32(dev->of_node, "qcom,remote-pid",
> + &remote_pid);
> + if (ret) {
> + dev_err(dev, "failed to parse qcom,remote-pid\n");
> + goto err_put_dev;
> + }
> +
> + rx_pipe = devm_kzalloc(dev, sizeof(*rx_pipe), GFP_KERNEL);
> + tx_pipe = devm_kzalloc(dev, sizeof(*tx_pipe), GFP_KERNEL);
> + if (!rx_pipe || !tx_pipe) {
> + ret = -ENOMEM;
> + goto err_put_dev;
> + }
> +
> + ret = qcom_smem_alloc(remote_pid,
> + SMEM_GLINK_NATIVE_XPRT_DESCRIPTOR, 32);
> + if (ret && ret != -EEXIST) {
> + dev_err(dev, "failed to allocate glink descriptors\n");
> + goto err_put_dev;
> + }
> +
> + descs = qcom_smem_get(remote_pid,
> + SMEM_GLINK_NATIVE_XPRT_DESCRIPTOR, &size);
> + if (IS_ERR(descs)) {
> + dev_err(dev, "failed to acquire xprt descriptor\n");
> + ret = PTR_ERR(descs);
> + goto err_put_dev;
> + }
> +
> + if (size != 32) {
> + dev_err(dev, "glink descriptor of invalid size\n");
> + ret = -EINVAL;
> + goto err_put_dev;
> + }
> +
> + tx_pipe->tail = &descs[0];
> + tx_pipe->head = &descs[1];
> + rx_pipe->tail = &descs[2];
> + rx_pipe->head = &descs[3];
> +
> + ret = qcom_smem_alloc(remote_pid, SMEM_GLINK_NATIVE_XPRT_FIFO_0,
> + SZ_16K);
> + if (ret && ret != -EEXIST) {
> + dev_err(dev, "failed to allocate TX fifo\n");
> + goto err_put_dev;
> + }
> +
> + tx_pipe->fifo = qcom_smem_get(remote_pid, SMEM_GLINK_NATIVE_XPRT_FIFO_0,
> + &tx_pipe->native.length);
> + if (IS_ERR(tx_pipe->fifo)) {
> + dev_err(dev, "failed to acquire TX fifo\n");
> + ret = PTR_ERR(tx_pipe->fifo);
> + goto err_put_dev;
> + }
> +
> + rx_pipe->native.avail = glink_smem_rx_avail;
> + rx_pipe->native.peak = glink_smem_rx_peak;
> + rx_pipe->native.advance = glink_smem_rx_advance;
> + rx_pipe->remote_pid = remote_pid;
> +
> + tx_pipe->native.avail = glink_smem_tx_avail;
> + tx_pipe->native.write = glink_smem_tx_write;
> + tx_pipe->remote_pid = remote_pid;
> +
> + *rx_pipe->tail = 0;
> + *tx_pipe->head = 0;
> +
> + glink = qcom_glink_native_probe(dev,
> + &rx_pipe->native, &tx_pipe->native);
> + if (IS_ERR(glink)) {
> + ret = PTR_ERR(glink);
> + goto err_put_dev;
> + }
> +
> + return glink;
> +
> +err_put_dev:
> + put_device(dev);
> +
> + return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(qcom_glink_smem_register);
> +
> +void qcom_glink_smem_unregister(struct qcom_glink *glink)
> +{
> + qcom_glink_native_remove(glink);
> + qcom_glink_native_unregister(glink);
> +}
> +EXPORT_SYMBOL_GPL(qcom_glink_smem_unregister);
> +
> +MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm GLINK SMEM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/rpmsg/qcom_glink.h b/include/linux/rpmsg/qcom_glink.h
> new file mode 100644
> index 0000000..a622f02
> --- /dev/null
> +++ b/include/linux/rpmsg/qcom_glink.h
> @@ -0,0 +1,27 @@
> +#ifndef _LINUX_RPMSG_QCOM_GLINK_H
> +#define _LINUX_RPMSG_QCOM_GLINK_H
> +
> +#include <linux/device.h>
> +
> +struct qcom_glink;
> +
> +#if IS_ENABLED(CONFIG_RPMSG_QCOM_GLINK_SMEM)
> +
> +struct qcom_glink *qcom_glink_smem_register(struct device *parent,
> + struct device_node *node);
> +void qcom_glink_smem_unregister(struct qcom_glink *glink);
> +
> +#else
> +
> +static inline struct qcom_glink *
> +qcom_glink_smem_register(struct device *parent,
> + struct device_node *node)
> +{
> + return NULL;
> +}
> +
> +static inline void qcom_glink_smem_unregister(struct qcom_glink *glink) {}
> +
> +#endif
> +
> +#endif

\
 
 \ /
  Last update: 2017-08-28 13:48    [W:0.255 / U:5.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site