[lkml]   [2017]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3 0/2] SoC driver for Broadcom STB DPFE
On 08/24/2017 04:36 PM, Markus Mayer wrote:
> From: Markus Mayer <>
> This series introduces a driver to interact with the Broadcom STB DDR
> PHY Front End (DPFE), specifically to communicate with the DCPU that is
> part of the DDR PHY and which is running its own firmware.
> The DCPU provides information such as DRAM refresh rate, which can be
> used as indirect indicator for the DRAM temperature (the higher the
> refresh rate, the hotter the RAM).
> The series was previously submitted as HWMON driver[1]. It has been
> removed from that subsystem, because it doesn't provide any standard
> HWMON data due to hardware design properties, and is now implemented as
> SoC driver.
> Changes since v2:
> - moved driver from drivers/soc/bcm/brcmstb to drivers/memory
> - renamed the driver from dpfe.c to brcmstb_dpfe.c
> - added le32_to_cpu() in a few places (where be32_to_cpu() calls
> already existed)
> - added a little blurb what the le32_to_cpu()/be32_to_cpu() business
> is all about
> Changes since v1:
> - binding simplified to use one node with three memory regions
> instead of three nodes with one region
> - no longer part of the HWMON subsystem
> - better error handling and error reporting to userland
> - uses [readl|writel]_relaxed() directly, since there is no need for
> wrappers doing endian conversion
> - re-download firmware upon "resume"
> - minor changes to improve clarity
> [1]

Applied, thanks Markus! Will get that resubmitted in a short while:

 \ /
  Last update: 2017-08-25 02:55    [W:0.069 / U:17.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site