lkml.org 
[lkml]   [2017]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/5] ARC: AXS103: DTS: Add core pll node to manage cpu frequency
Date
On Tue, 2017-08-22 at 13:45 -0700, Vineet Gupta wrote:
> On 08/14/2017 09:12 AM, Eugeniy Paltsev wrote:
> > Add core pll node (core_clk) to manage cpu frequency.
> > core_clk represents pll itself.
> > input_clk represents clock signal source (basically xtal) which
> > comes to pll input.
> >
> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> > ---
> >   arch/arc/boot/dts/axc003.dtsi     | 11 +++++++++--
> >   arch/arc/boot/dts/axc003_idu.dtsi | 11 +++++++++--
> >   2 files changed, 18 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arc/boot/dts/axc003.dtsi
> > b/arch/arc/boot/dts/axc003.dtsi
> > index cc9239e..dca7e39 100644
> > --- a/arch/arc/boot/dts/axc003.dtsi
> > +++ b/arch/arc/boot/dts/axc003.dtsi
> > @@ -24,10 +24,17 @@
> >   
> >    ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
> >   
> > - core_clk: core_clk {
> > + input_clk: input-clk {
> >    #clock-cells = <0>;
> >    compatible = "fixed-clock";
> > - clock-frequency = <90000000>;
> > + clock-frequency = <33333333>;
> > + };
> > +
> > + core_clk: core-clk@80 {
> > + compatible = "snps,axs10x-arc-pll-clock";
> > + reg = <0x80 0x10>, <0x100 0x10>;
> > + #clock-cells = <0>;
> > + clocks = <&input_clk>;
> >    };
> >   
> >    core_intc: archs-intc@cpu {
> > diff --git a/arch/arc/boot/dts/axc003_idu.dtsi
> > b/arch/arc/boot/dts/axc003_idu.dtsi
> > index 4ebb2170..5b56bef 100644
> > --- a/arch/arc/boot/dts/axc003_idu.dtsi
> > +++ b/arch/arc/boot/dts/axc003_idu.dtsi
> > @@ -24,10 +24,17 @@
> >   
> >    ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
> >   
> > - core_clk: core_clk {
> > + input_clk: input-clk {
> >    #clock-cells = <0>;
> >    compatible = "fixed-clock";
> > - clock-frequency = <100000000>;
> > + clock-frequency = <33333333>;
> > + };
> > +
> > + core_clk: core-clk@80 {
> > + compatible = "snps,axs10x-arc-pll-clock";
> > + reg = <0x80 0x10>, <0x100 0x10>;
> > + #clock-cells = <0>;
> > + clocks = <&input_clk>;
> >    };
> >   
> >    core_intc: archs-intc@cpu {
>
>
> Do we have a bisectability issue here - isn't system broken
> temporarily at 2/5 - 
> and only 3/5 makes it work again - if so we need to squash them
> together !

Could you please be more specific about this bisectability issue as I
can't see it here.

If we apply 2/5 and don't apply 3/5 we simply won't change frequency
after linux boot. We won't increase frequency so I can't see any
problem here here.



---
The only problem I can see is in 4/5:
I should use
cpu-freq = <90000000>;
instead of
cpu-freq = <100000000>;
in arch/arc/boot/dts/axc003.dtsi
So diff should be like
--------------->8-----------
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       compatible = "snps,archs38";
+                       reg = <0>;
+                       cpu-freq = <90000000>;
+                       clocks = <&core_clk>;
+               };
+       };
+
--------------->8-----------

Should I send you v2 respin or you'll fix that up locally?

> -Vineet
--
 Eugeniy Paltsev
\
 
 \ /
  Last update: 2017-08-23 14:19    [W:0.099 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site