lkml.org 
[lkml]   [2017]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] pinctrl: rockchip: Add rv1108 recalculated iomux support
Date
The pins from GPIO1A0 to GPIO1B1 are special, need to recalculate
iomux. And the register offset is larger than the u8 range, so changed
to u32.

Signed-off-by: David Wu <david.wu@rock-chips.com>
---
drivers/pinctrl/pinctrl-rockchip.c | 68 +++++++++++++++++++++++++++++++++++++-
1 file changed, 67 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index c6f472e..b5cb785 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -301,7 +301,7 @@ struct rockchip_pin_bank {
struct rockchip_mux_recalced_data {
u8 num;
u8 pin;
- u8 reg;
+ u32 reg;
u8 bit;
u8 mask;
};
@@ -558,6 +558,70 @@ static void rockchip_dt_free_map(struct pinctrl_dev *pctldev,
* Hardware access
*/

+static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = {
+ {
+ .num = 1,
+ .pin = 0,
+ .reg = 0x418,
+ .bit = 0,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 1,
+ .reg = 0x418,
+ .bit = 2,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 2,
+ .reg = 0x418,
+ .bit = 4,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 3,
+ .reg = 0x418,
+ .bit = 6,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 4,
+ .reg = 0x418,
+ .bit = 8,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 5,
+ .reg = 0x418,
+ .bit = 10,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 6,
+ .reg = 0x418,
+ .bit = 12,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 7,
+ .reg = 0x418,
+ .bit = 14,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 8,
+ .reg = 0x41c,
+ .bit = 0,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 9,
+ .reg = 0x41c,
+ .bit = 2,
+ .mask = 0x3
+ },
+};
+
static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
{
.num = 2,
@@ -3162,6 +3226,8 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
.type = RV1108,
.grf_mux_offset = 0x10,
.pmu_mux_offset = 0x0,
+ .iomux_recalced = rv1108_mux_recalced_data,
+ .niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data),
.pull_calc_reg = rv1108_calc_pull_reg_and_bit,
.drv_calc_reg = rv1108_calc_drv_reg_and_bit,
.schmitt_calc_reg = rv1108_calc_schmitt_reg_and_bit,
--
1.9.1

\
 
 \ /
  Last update: 2017-08-23 09:56    [W:0.063 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site