Messages in this thread | | | Date | Tue, 22 Aug 2017 19:20:57 +0000 | From | Priit Laes <> | Subject | Re: Crash due to fbca164776e438 - "net: stmmac: Use the right logging function in stmmac_mdio_register" |
| |
On Tue, Aug 22, 2017 at 12:01:32PM -0700, Florian Fainelli wrote: > On 08/22/2017 11:47 AM, Priit Laes wrote: > > Hi! > > > > I'm running into following crash during boot on Cubietruck A20, with the patch > > fbca164776e438 > > (net: stmmac: Use the right logging function in stmmac_mdio_register) applied: > > > > [snip] > > sun7i-dwmac 1c50000.ethernet: PTP uses main clock > > sun7i-dwmac 1c50000.ethernet: no reset control found > > sun7i-dwmac 1c50000.ethernet: no regulator found > > sun7i-dwmac 1c50000.ethernet: Ring mode enabled > > sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported > > sun7i-dwmac 1c50000.ethernet: Normal descriptors > > libphy: stmmac: probed > > Unable to handle kernel NULL pointer dereference at virtual address 00000048 > > Yes indeed: > > (gdb) p/x (int)&((struct phy_driver *)0)->name > $2 = 0x48 > > The following should fix it: > > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c > index 9493fb369682..810f6fd2f639 100644 > --- a/drivers/net/phy/phy_device.c > +++ b/drivers/net/phy/phy_device.c > @@ -877,15 +877,17 @@ EXPORT_SYMBOL(phy_attached_info); > #define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, > irq=%d)" > void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) > { > + const char *drv_name = phydev->drv ? phydev->drv->name : "unbound"; > + > if (!fmt) { > dev_info(&phydev->mdio.dev, ATTACHED_FMT "\n", > - phydev->drv->name, phydev_name(phydev), > + drv_name, phydev_name(phydev), > phydev->irq); > } else { > va_list ap; > > dev_info(&phydev->mdio.dev, ATTACHED_FMT, > - phydev->drv->name, phydev_name(phydev), > + drv_name, phydev_name(phydev), > phydev->irq); > > va_start(ap, fmt); >
Thanks, patch works.
Tested-By: Priit Laes <plaes@plaes.org>
With reverted patch:
sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
With changes by Florian:
mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=-1) mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=-1)
Päikest, Priit :)
| |