lkml.org 
[lkml]   [2017]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] ARM: dts: rockchip: add cpu opp table for rv1108
Date
Add cpu opp table for rv1108 to support frequency
from 408MHZ to 1008MHZ.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

---

Changes in v2:
- switch to operating-points-v2
- split cpu-supply to a separate patch

arch/arm/boot/dts/rv1108.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 064cec3..1b854e1 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -69,6 +69,33 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&cru ARMCLK>;
+ };
+ };
+
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <40000>;
};
};

--
2.7.4

\
 
 \ /
  Last update: 2017-08-22 15:12    [W:0.066 / U:7.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site