lkml.org 
[lkml]   [2017]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.
Date
When using MII/GMII/SGMII in the Altera SoC, the phy needs to be
wired through the FPGA. To ensure correct behavior, the appropriate
bit in the System Manager FPGA Interface Group register needs to be
set.

Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 17d4bba..6e35957 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -269,7 +269,10 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
ctrl |= val << reg_shift;

- if (dwmac->f2h_ptp_ref_clk) {
+ if (dwmac->f2h_ptp_ref_clk ||
+ phymode == PHY_INTERFACE_MODE_MII ||
+ phymode == PHY_INTERFACE_MODE_GMII ||
+ phymode == PHY_INTERFACE_MODE_SGMII) {
ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
&module);
--
2.7.4
\
 
 \ /
  Last update: 2017-08-22 14:26    [W:0.055 / U:5.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site