lkml.org 
[lkml]   [2017]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] eeprom: at24: enable runtime pm support
Hi Divagar,

Thanks for the patch. Please see my comments below.

On Tue, Aug 15, 2017 at 12:11:59AM +0530, Divagar Mohandass wrote:
> Currently the device is kept in D0, there is an opportunity
> to save power by enabling runtime pm.
>
> Device can be daisy chained from PMIC and we can't rely on I2C core
> for auto resume/suspend. Driver will decide when to resume/suspend.
>
> Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
> ---
> drivers/misc/eeprom/at24.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index 2199c42..0d26681 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -24,6 +24,7 @@
> #include <linux/i2c.h>
> #include <linux/nvmem-provider.h>
> #include <linux/platform_data/at24.h>
> +#include <linux/pm_runtime.h>
>
> /*
> * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
> @@ -501,11 +502,21 @@ static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf,
> static int at24_read(void *priv, unsigned int off, void *val, size_t count)
> {
> struct at24_data *at24 = priv;
> + struct i2c_client *client;
> char *buf = val;
> + int ret;
>
> if (unlikely(!count))
> return count;
>
> + client = at24_translate_offset(at24, &off);
> +
> + ret = pm_runtime_get_sync(&client->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&client->dev);
> + return ret;
> + }
> +

at24_read() may fail between the two chunks here. You'll need
pm_runtime_put() before returning the error code.

> /*
> * Read data from chip, protecting against concurrent updates
> * from this host, but not from other I2C masters.
> @@ -527,17 +538,29 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
>
> mutex_unlock(&at24->lock);
>
> + pm_runtime_put(&client->dev);
> +
> return 0;
> }
>
> static int at24_write(void *priv, unsigned int off, void *val, size_t count)
> {
> struct at24_data *at24 = priv;
> + struct i2c_client *client;
> char *buf = val;
> + int ret;
>
> if (unlikely(!count))
> return -EINVAL;
>
> + client = at24_translate_offset(at24, &off);
> +
> + ret = pm_runtime_get_sync(&client->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&client->dev);
> + return ret;
> + }
> +
> /*
> * Write data to chip, protecting against concurrent updates
> * from this host, but not from other I2C masters.

Ditto for write.

> @@ -559,6 +582,8 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
>
> mutex_unlock(&at24->lock);
>
> + pm_runtime_put(&client->dev);
> +
> return 0;
> }
>
> @@ -743,6 +768,13 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
>
> i2c_set_clientdata(client, at24);
>
> + /* enable runtime pm */
> + err = pm_runtime_set_active(&client->dev);
> + if (err < 0)
> + goto err_clients;
> +
> + pm_runtime_enable(&client->dev);
> +

Here, too: at24_read() below can fail, as well as nvmem_register().

> /*
> * Perform a one-byte test read to verify that the
> * chip is functional.
> @@ -810,6 +842,8 @@ static int at24_remove(struct i2c_client *client)
> for (i = 1; i < at24->num_addresses; i++)
> i2c_unregister_device(at24->client[i]);
>
> + pm_runtime_disable(&client->dev);

pm_runtime_set_suspended(&client->dev)

> +
> return 0;
> }
>

--
Regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi

\
 
 \ /
  Last update: 2017-08-22 10:57    [W:0.122 / U:5.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site