lkml.org 
[lkml]   [2017]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva
Date
From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>

This patch adds device tree bindings for sata port phy parameters
in the ahci-ceva.txt file.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2:
- DT fix naming in parameters description use pN instead of phy
reported by Rob

.../devicetree/bindings/ata/ahci-ceva.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
index 7ca8b976c13a..7561cc4de371 100644
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
@@ -5,6 +5,36 @@ Required properties:
- compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt binding.
+ - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
+ - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+ CINMP : COMINIT Negate Minimum Period.
+ CIBGN : COMINIT Burst Gap Nominal.
+ CIBGMX: COMINIT Burst Gap Maximum.
+ CIBGMN: COMINIT Burst Gap Minimum.
+ - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
+ - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+ CWBGMN: COMWAKE Burst Gap Minimum.
+ CWBGMX: COMWAKE Burst Gap Maximum.
+ CWBGN: COMWAKE Burst Gap Nominal.
+ CWNMP: COMWAKE Negate Minimum Period.
+ - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
+ - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+ BMX: COM Burst Maximum.
+ BNM: COM Burst Nominal.
+ SFD: Signal Failure Detection value.
+ PTST: Partial to Slumber timer value.
+ - ceva,p0-retry-params: Retry interval timing value for port 0.
+ - ceva,p1-retry-params: Retry interval timing value for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+ RIT: Retry Interval Timer.
+ RCT: Rate Change Timer.

Optional properties:
- ceva,broken-gen2: limit to gen1 speed instead of gen2.
@@ -16,5 +46,14 @@ Examples:
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
clocks = <&clkc SATA_CLK_ID>;
+ ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+
+ ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
ceva,broken-gen2;
};
--
1.9.1
\
 
 \ /
  Last update: 2017-08-21 13:20    [W:1.053 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site