lkml.org 
[lkml]   [2017]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/6] dt-bindings: ti,edma: Add 66AK2G specific information
From
Date


On 8/1/2017 6:20 PM, Peter Ujfalusi wrote:
>
>
> On 2017-08-01 07:41, Lokesh Vutla wrote:
>> Update ti,edma binding documentation to reflect 66AK2G specific
>> properties.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>> Documentation/devicetree/bindings/dma/ti-edma.txt | 95
>> +++++++++++++++++++++--
>> 1 file changed, 90 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt
>> b/Documentation/devicetree/bindings/dma/ti-edma.txt
>> index 18090e7226b4..05fe2931d025 100644
>> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
>> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
>> @@ -9,7 +9,12 @@ execute the actual DMA tansfer.
>> eDMA3 Channel Controller
>>
>> Required properties:
>> -- compatible: "ti,edma3-tpcc" for the channel controller(s)
>> +--------------------
>> +- compatible: Should be:
>> + - "ti,edma3-tpcc" for the channel controller(s) on OMAP,
>> + AM33xx and AM43xx SoCs.
>> + - "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the
>> + channel controller(s) on 66AK2G.
>> - #dma-cells: Should be set to <2>. The first number is the DMA
>> request
>> number and the second is the TC the channel is serviced on.
>> - reg: Memory map of eDMA CC
>> @@ -19,8 +24,19 @@ Required properties:
>> - ti,tptcs: List of TPTCs associated with the eDMA in the
>> following form:
>> <&tptc_phandle TC_priority_number>. The highest priority is 0.
>>
>> +SoC-specific Required properties:
>> +--------------------------------
>> +The following are mandatory properties for OMAP, AM33xx and AM43xx
>> SoCs only:
>> +- ti,hwmods: Name of the hwmods associated to the eDMA CC.
>> +
>> +The following are mandatory properties for 66AK2G SoCs only:
>> +- power-domains:Should contain a phandle to a PM domain provider node
>> + and an args specifier containing the device id
>> + value. This property is as per the binding,
>> + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>> +
>> Optional properties:
>> -- ti,hwmods: Name of the hwmods associated to the eDMA CC
>> +-------------------
>> - ti,edma-memcpy-channels: List of channels allocated to be used for
>> memcpy, iow
>> these channels will be SW triggered channels. See example.
>> - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be
>> used by
>> @@ -31,17 +47,34 @@ Optional properties:
>> eDMA3 Transfer Controller
>>
>> Required properties:
>> -- compatible: "ti,edma3-tptc" for the transfer controller(s)
>> +--------------------
>> +- compatible: Should be:
>> + - "ti,edma3-tptc" for the transfer controller(s) on OMAP,
>> + AM33xx and AM43xx SoCs.
>> + - "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the
>> + transfer controller(s) on 66AK2G.
>> - reg: Memory map of eDMA TC
>> - interrupts: Interrupt number for TCerrint.
>>
>> +SoC-specific Required properties:
>> +--------------------------------
>> +The following are mandatory properties for OMAP, AM33xx and AM43xx
>> SoCs only:
>> +- ti,hwmods: Name of the hwmods associated to the eDMA TC.
>> +
>> +The following are mandatory properties for 66AK2G SoCs only:
>> +- power-domains:Should contain a phandle to a PM domain provider node
>> + and an args specifier containing the device id
>> + value. This property is as per the binding,
>> + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>> +
>> Optional properties:
>> -- ti,hwmods: Name of the hwmods associated to the given eDMA TC
>> +-------------------
>> - interrupt-names: "edma3_tcerrint"
>>
>> ------------------------------------------------------------------------------
>>
>> -Example:
>> +Examples:
>
> Do we really need to expand the examples to have identical set, but with
> power-domains?

IIRC, there was a feedback to add an example(not able to fine that
specific email). If you strongly disagree with this, I can drop it and
resend it.

Thanks and regards,
Lokesh

>
>>
>> +1.
>> edma: edma@49000000 {
>> compatible = "ti,edma3-tpcc";
>> ti,hwmods = "tpcc";
>> @@ -109,6 +142,58 @@ mcasp0: mcasp@48038000 {
>> dma-names = "tx", "rx";
>> };
>>
>> +2.
>> +edma1: edma@02728000 {
>> + compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
>> + reg = <0x02728000 0x8000>;
>> + reg-names = "edma3_cc";
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "edma3_ccint", "emda3_mperr",
>> + "edma3_ccerrint";
>> + dma-requests = <64>;
>> + #dma-cells = <2>;
>> +
>> + ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
>> +
>> + /*
>> + * memcpy is disabled, can be enabled with:
>> + * ti,edma-memcpy-channels = <12 13 14 15>;
>> + * for example.
>> + */
>> +
>> + power-domains = <&k2g_pds 0x4f>;
>> +};
>> +
>> +edma1_tptc0: tptc@027b0000 {
>> + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
>> + reg = <0x027b0000 0x400>;
>> + power-domains = <&k2g_pds 0x4f>;
>> +};
>> +
>> +edma1_tptc1: tptc@027b8000 {
>> + compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
>> + reg = <0x027b8000 0x400>;
>> + power-domains = <&k2g_pds 0x4f>;
>> +};
>> +
>> +mmc0: mmc@23000000 {
>> + compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
>> + reg = <0x23000000 0x400>;
>> + interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
>> + dmas = <&edma1 24 0>, <&edma1 25 0>;
>> + dma-names = "tx", "rx";
>> + bus-width = <4>;
>> + ti,needs-special-reset;
>> + no-1-8-v;
>> + max-frequency = <96000000>;
>> + power-domains = <&k2g_pds 0xb>;
>> + clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
>> + clock-names = "fck", "mmchsdb_fck";
>> + status = "disabled";
>> +};
>> +
>> ------------------------------------------------------------------------------
>>
>> DEPRECATED binding, new DTS files must use the
>> ti,edma3-tpcc/ti,edma3-tptc
>> binding.
>>
>
> - Péter

\
 
 \ /
  Last update: 2017-08-02 19:05    [W:0.290 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site