lkml.org 
[lkml]   [2017]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm, am335x: add support for Moxa UC-8100-ME-T open platform
On Tue, Aug 1, 2017 at 6:26 AM, SZ Lin <sz.lin@moxa.com> wrote:
> Add support for Moxa UC-8100-ME-T open platform
>
> The UC-8100-ME-T computing platform is designed
> for embedded data acquisition industrial applications
>
> The features of UC-8100-ME-T series are:
> * eMMC
> * SPI flash
> * SD slot
> * 2x LAN
> * 2 RS-232/422/485 ports, software-selectable
> * Mini PCIe form factor with USB signal
> * USB host
> * EEPROM
> * TPM
> * Watchdog
> * RTC
> * User gpio-keys
> * User LEDs
> * User button
>
> Signed-off-by: SZ Lin <sz.lin@moxa.com>
> ---
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts | 525 +++++++++++++++++++++
> 3 files changed, 529 insertions(+)
> create mode 100644 arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index 8219b2c6bb29..72ad8700156a 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -154,6 +154,9 @@ Boards:
> - AM335X phyCORE-AM335x: Development kit
> compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"
>
> +- AM335X UC-8100-ME-T: Communication-centric industrial computing platform
> + compatible = "moxa,uc-8100-me-t", "ti,am33xx";
> +
> - OMAP5 EVM : Evaluation Module
> compatible = "ti,omap5-evm", "ti,omap5"
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4b17f35dc9a7..2e60f4947c96 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -618,6 +618,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
> am335x-icev2.dtb \
> am335x-lxm.dtb \
> am335x-nano.dtb \
> + am335x-moxa-uc-8100-me-t.dtb \
> am335x-pepper.dtb \
> am335x-phycore-rdk.dtb \
> am335x-shc.dtb \
> diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
> new file mode 100644
> index 000000000000..9a7a421b0d6b
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
> @@ -0,0 +1,525 @@
> +/*
> + * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
> + *
> + * Author: SZ Lin (林上智) <sz.lin@moxa.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +
> +#include "am33xx.dtsi"
> +
> +/ {
> + model = "Moxa UC-8100-ME-T";
> + compatible = "moxa,uc-8100-me-t", "ti,am33xx";
> +
> + cpus {
> + cpu@0 {
> + cpu0-supply = <&vdd1_reg>;
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>; /* 512 MB */
> + };
> +
> + vbat: fixedregulator@0 {
> + compatible = "regulator-fixed";
> + };
> +
> + /* Power supply provides a fixed 3.3V @3A */
> + vmmcsd_fixed: fixedregulator@1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vmmcsd_fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + led@1 {


Please remove the un-needed @ in led@x's

see for example:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/am335x-bone-common.dtsi?h=v4.13-rc3&id=c731abd99121cae0b9a1735c062c96c56e2b72fc

> + label = "uc8100me:CEL1";
> + gpios = <&gpio_xten 8 0>;
> + default-state = "off";
> + };
> +
> + led@2 {
> + label = "uc8100me:CEL2";
> + gpios = <&gpio_xten 9 0>;
> + default-state = "off";
> + };
> +
> + led@3 {
> + label = "uc8100me:CEL3";
> + gpios = <&gpio_xten 10 0>;
> + default-state = "off";
> + };
> +
> + led@4 {
> + label = "uc8100me:DIA1";
> + gpios = <&gpio_xten 11 0>;
> + default-state = "off";
> + };
> + led@5 {
> + label = "uc8100me:DIA2";
> + gpios = <&gpio_xten 12 0>;
> + default-state = "off";
> + };
> + led@6 {
> + label = "uc8100me:DIA3";
> + gpios = <&gpio_xten 13 0>;
> + default-state = "off";
> + };
> + led@7 {
> + label = "uc8100me:SD";
> + gpios = <&gpio_xten 14 0>;
> + default-state = "off";
> + };
> + led@8 {
> + label = "uc8100me:USB";
> + gpios = <&gpio_xten 15 0>;
> + default-state = "off";
> + };
> + led@9 {
> + label = "uc8100me:USER";
> + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> + };
> +
> + buttons: push_button {
> + compatible = "gpio-keys";
> + };
> +
> +};
> +
> +&am33xx_pinmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&minipcie_pins>;
> +
> + minipcie_pins: pinmux_minipcie {
> + pinctrl-single,pins = <
> + 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2_24 */
> + 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
> + 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/

please use the AM33XX_IOPAD macros:

example:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/am335x-bone-common.dtsi?h=v4.13-rc3&id=e03b2a26d6bf93d1631aa36985892877986ee7b9

> + >;
> + };
> +
> + push_button_pins: pinmux_push_button {
> + pinctrl-single,pins = <
> + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
> + >;
> + };
> +
> + i2c0_pins: pinmux_i2c0_pins {
> + pinctrl-single,pins = <
> + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
> + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
> + >;
> + };
> +
> +
> + i2c1_pins: pinmux_i2c1_pins {
> + pinctrl-single,pins = <
> + 0x168 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_ctsn.i2c1_sda */
> + 0x16c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_rtsn.i2c1_scl */
> + >;
> + };
> +
> + uart0_pins: pinmux_uart0_pins {
> + pinctrl-single,pins = <
> + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
> + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
> + >;
> + };
> +
> + uart1_pins: pinmux_uart1_pins {
> + pinctrl-single,pins = <
> + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
> + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
> + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
> + 0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
> + >;
> + };
> +
> + uart2_pins: pinmux_uart2_pins {
> + pinctrl-single,pins = <
> + 0xd8 (PIN_INPUT | MUX_MODE6) /* lcd_data14.uart5_ctsn */
> + 0xdc (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data15.uart5_rtsn */
> + 0xc4 (PIN_INPUT_PULLUP | MUX_MODE4) /* lcd_data9.uart5_rxd */
> + 0xc0 (PIN_OUTPUT | MUX_MODE4) /* lcd_data8.uart5_txd */
> + >;
> + };
> +
> + cpsw_default: cpsw_default {
> + pinctrl-single,pins = <
> + /* Slave 1 */
> + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
> + 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
> + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
> + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
> + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
> + 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
> + 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
> + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
> +
> + /* Slave 2 */
> + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
> + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
> + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
> + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
> + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
> + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
> + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
> + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
> +
> + >;
> + };
> +
> + davinci_mdio_default: davinci_mdio_default {
> + pinctrl-single,pins = <
> + /* MDIO */
> + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
> + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
> + >;
> + };
> +
> + mmc0_pins_default: pinmux_mmc0_pins {
> + pinctrl-single,pins = <
> + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
> + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
> + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
> + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
> + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
> + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
> + 0x190 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
> + 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
> + >;
> + };
> +
> + mmc2_pins_default: pinmux_mmc2_pins {
> + pinctrl-single,pins = <
> + /* eMMC */
> + 0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
> + 0x34 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
> + 0x38 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
> + 0x3c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
> + 0x20 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
> + 0x24 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
> + 0x28 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
> + 0x2c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
> + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
> + 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
> + >;
> + };
> +
> + spi0_pins: pinmux_spi0 {
> + pinctrl-single,pins = <
> + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
> + 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
> + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
> + 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
> + >;
> + };
> +
> +};
> +
> +&uart0 {
> + /* Console */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins>;
> +};
> +
> +&uart1 {
> + /* UART 1 setting */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> +};
> +
> +&uart5 {
> + /* UART 2 setting */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_pins>;
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> +
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + tpm: tpm@20 {
> + compatible = "infineon,slb9645tt";
> + reg = <0x20>;
> + };
> +
> + tps: tps@2d {
> + compatible = "ti,tps65910";
> + reg = <0x2d>;
> + };
> +
> + eeprom: eeprom@50 {
> + compatible = "atmel,24c16";
> + pagesize = <16>;
> + reg = <0x50>;
> + };
> +
> + rtc_wdt: rtc_wdt@68 {
> + compatible = "dallas,ds1374";
> + reg = <0x68>;
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> +
> + status = "okay";
> + clock-frequency = <400000>;
> + gpio_xten: gpio_xten@27 {
> + compatible = "nxp,pca9535";
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x27>;
> + };
> +};
> +
> +&usb {
> + status = "okay";
> +};
> +
> +&usb_ctrl_mod {
> + status = "okay";
> +};
> +
> +&usb0_phy {
> + status = "okay";
> +};
> +
> +&usb1_phy {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&usb1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&cppi41dma {
> + status = "okay";
> +};
> +
> +#include "tps65910.dtsi"
> +
> +&tps {
> + vcc1-supply = <&vbat>;
> + vcc2-supply = <&vbat>;
> + vcc3-supply = <&vbat>;
> + vcc4-supply = <&vbat>;
> + vcc5-supply = <&vbat>;
> + vcc6-supply = <&vbat>;
> + vcc7-supply = <&vbat>;
> + vccio-supply = <&vbat>;
> +
> + regulators {
> + vrtc_reg: regulator@0 {
> + regulator-always-on;
> + };
> +
> + vio_reg: regulator@1 {
> + regulator-always-on;
> + };
> +
> + vdd1_reg: regulator@2 {
> + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
> + regulator-name = "vdd_mpu";
> + regulator-min-microvolt = <912500>;
> + regulator-max-microvolt = <1378000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vdd2_reg: regulator@3 {
> + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
> + regulator-name = "vdd_core";
> + regulator-min-microvolt = <912500>;
> + regulator-max-microvolt = <1150000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vdd3_reg: regulator@4 {
> + regulator-always-on;
> + };
> +
> + vdig1_reg: regulator@5 {
> + regulator-always-on;
> + };
> +
> + vdig2_reg: regulator@6 {
> + regulator-always-on;
> + };
> +
> + vpll_reg: regulator@7 {
> + regulator-always-on;
> + };
> +
> + vdac_reg: regulator@8 {
> + regulator-always-on;
> + };
> +
> + vaux1_reg: regulator@9 {
> + regulator-always-on;
> + };
> +
> + vaux2_reg: regulator@10 {
> + regulator-always-on;
> + };
> +
> + vaux33_reg: regulator@11 {
> + regulator-always-on;
> + };
> +
> + vmmc_reg: regulator@12 {
> + compatible = "regulator-fixed";
> + regulator-name = "vmmc_reg";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> +};
> +
> +/* Power */
> +&vbat {
> + regulator-name = "vbat";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +};
> +
> +&mac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&cpsw_default>;
> + dual_emac = <1>;
> + status = "okay";
> +};
> +
> +&davinci_mdio {
> + pinctrl-names = "default";
> + pinctrl-0 = <&davinci_mdio_default>;
> + status = "okay";
> +};
> +
> +&cpsw_emac0 {
> + status = "okay";
> + phy_id = <&davinci_mdio>, <4>;
> + phy-mode = "rmii";
> + dual_emac_res_vlan = <1>;
> +};
> +
> +&cpsw_emac1 {
> + status = "okay";
> + phy_id = <&davinci_mdio>, <5>;
> + phy-mode = "rmii";
> + dual_emac_res_vlan = <2>;
> +};
> +
> +&phy_sel {
> + reg= <0x44e10650 0xf5>;
> + rmii-clock-ext;
> +};
> +
> +&sham {
> + status = "okay";
> +};
> +
> +&aes {
> + status = "okay";
> +};
> +
> +&gpio0 {
> + ti,no-reset-on-init;
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default";
> + vmmc-supply = <&vmmcsd_fixed>;
> + bus-width = <4>;
> + pinctrl-0 = <&mmc0_pins_default>;
> + cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
> + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&mmc3 {
> + dmas = <&edma_xbar 12 0 1
> + &edma_xbar 13 0 2>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default";
> + vmmc-supply = <&vmmcsd_fixed>;
> + bus-width = <8>;
> + pinctrl-0 = <&mmc2_pins_default>;
> + ti,non-removable;
> + status = "okay";
> +};
> +
> +&buttons {
> + pinctrl-names = "default";
> + pinctrl-0 = <&push_button_pins>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + button@0 {
> + label = "push_button";
> + linux,code = <0x100>;
> + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +/* SPI Busses */
> +&spi0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_pins>;
> +
> + m25p80@0 {
> + compatible = "mx25l6405d";
> + spi-max-frequency = <40000000>;
> +
> + reg = <0>;
> + spi-cpol;
> + spi-cpha;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + /* reg : The partition's offset and size within the mtd bank. */
> + partitions@0 {
> + label = "MLO";
> + reg = <0x0 0x80000>;
> + };
> +
> + partitions@1 {
> + label = "U-Boot";
> + reg = <0x80000 0x100000>;
> + };
> +
> + partitions@2 {
> + label = "U-Boot Env";
> + reg = <0x180000 0x20000>;
> + };
> + };
> +};
> --
> 2.13.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

Regards,

--
Robert Nelson
https://rcn-ee.com/

\
 
 \ /
  Last update: 2017-08-02 07:09    [W:0.051 / U:0.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site