lkml.org 
[lkml]   [2017]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] msleep() delays - replace with usleep_range() in TPM 1.2/2.0 generic drivers
On Mon, Aug 14, 2017 at 07:09:16PM +0100, Hamza Attak wrote:
> The patch simply replaces all msleep function calls with usleep_range calls
> in the generic drivers.
>
> Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a
> thousand PCR extends, we see results going from 1m57s unpatched to 40s
> with the new patch. We obtain similar results when using the original and
> patched tpm_infineon driver, which is also part of the patch.
> Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per
> extend unpatched and around 7ms with the new patch.
>
> Note that the PCR consistency is untouched with this patch, each TPM has
> been tested with 10 million extends and the aggregated PCR value is
> continuously verified to be correct.
>
> As an extension of this work, this could potentially and easily be applied
> to other vendor's drivers. Still, these changes are not included in the
> proposed patch as they are untested.
>
> Signed-off-by: Hamza Attak <hamza@hpe.com>

Applying this.

Tested-by: Jarkko Sakkine <jarkko.sakkinen@linux.intel.com>

PS. Your short summary is broken. See how I fixed it. Otherwise,
no complains.

/Jarkko

\
 
 \ /
  Last update: 2017-08-19 14:16    [W:0.380 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site