lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/18] PCI: dwc: dra7xx: Reset all BARs during initialization
Date
dra7xx has all base address registers (BAR) enabled by default. Reset all
BARs during initialization and so that BARs are enabled only if they are
actually used.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/dwc/pci-dra7xx.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index f2fc5f47064e..ee61f833b62c 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -335,10 +335,23 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}

+static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
+{
+ u32 reg;
+
+ reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+ dw_pcie_writel_dbi2(pci, reg, 0x0);
+ dw_pcie_writel_dbi(pci, reg, 0x0);
+}
+
static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+ enum pci_barno bar;
+
+ for (bar = BAR_0; bar <= BAR_5; bar++)
+ dw_pcie_ep_reset_bar(pci, bar);

dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
}
--
2.11.0
\
 
 \ /
  Last update: 2017-08-18 17:02    [W:0.071 / U:6.872 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site