lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/18] PCI: dwc: designware-ep: Do not disable BARs during initialization
Date
Some platforms like K2G has reserved use of BAR_0 which shouldn't be
disabled by software. Avoid disabling all BARs during initialization.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/dwc/pcie-designware-ep.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index e70ebe3b9b6f..b3205df38d52 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -283,7 +283,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
{
int ret;
void *addr;
- enum pci_barno bar;
struct pci_epc *epc;
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct device *dev = pci->dev;
@@ -312,9 +311,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
return -ENOMEM;
ep->outbound_addr = addr;

- for (bar = BAR_0; bar <= BAR_5; bar++)
- dw_pcie_ep_reset_bar(pci, bar);
-
if (ep->ops->ep_init)
ep->ops->ep_init(ep);

--
2.11.0
\
 
 \ /
  Last update: 2017-08-18 17:02    [W:0.111 / U:2.740 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site