lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/18] misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR
Date
pci_endpoint_test driver assumes the PCI_ENDPOINT_TEST registers will
always be mapped to BAR_0. This need not always be the case like in
TI's K2G where BAR_0 is mapped to PCI controller application registers.
Add support so that PCI_ENDPOINT_TEST registers can be mapped to any BAR.
Change the bar_size used for BAR test accordingly.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/misc/pci_endpoint_test.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 09c10f426b64..5fc0f6c6a9e5 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -90,9 +90,14 @@ struct pci_endpoint_test {
/* mutex to protect the ioctls */
struct mutex mutex;
struct miscdevice miscdev;
+ enum pci_barno test_reg_bar;
};

-static int bar_size[] = { 4, 512, 1024, 16384, 131072, 1048576 };
+struct pci_endpoint_test_data {
+ enum pci_barno test_reg_bar;
+};
+
+static int bar_size[] = { 512, 512, 1024, 16384, 131072, 1048576 };

static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
u32 offset)
@@ -147,6 +152,9 @@ static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,

size = bar_size[barno];

+ if (barno == test->test_reg_bar)
+ size = 0x4;
+
for (j = 0; j < size; j += 4)
pci_endpoint_test_bar_writel(test, barno, j, 0xA0A0A0A0);

@@ -390,6 +398,8 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
void __iomem *base;
struct device *dev = &pdev->dev;
struct pci_endpoint_test *test;
+ struct pci_endpoint_test_data *data;
+ enum pci_barno test_reg_bar = BAR_0;
struct miscdevice *misc_device;

if (pci_is_bridge(pdev))
@@ -399,7 +409,13 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
if (!test)
return -ENOMEM;

+ test->test_reg_bar = 0;
test->pdev = pdev;
+
+ data = (struct pci_endpoint_test_data *)ent->driver_data;
+ if (data)
+ test_reg_bar = data->test_reg_bar;
+
init_completion(&test->irq_raised);
mutex_init(&test->mutex);

@@ -441,14 +457,15 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
base = pci_ioremap_bar(pdev, bar);
if (!base) {
dev_err(dev, "failed to read BAR%d\n", bar);
- WARN_ON(bar == BAR_0);
+ WARN_ON(bar == test_reg_bar);
}
test->bar[bar] = base;
}

- test->base = test->bar[0];
+ test->base = test->bar[test_reg_bar];
if (!test->base) {
- dev_err(dev, "Cannot perform PCI test without BAR0\n");
+ dev_err(dev, "Cannot perform PCI test without BAR%d\n",
+ test_reg_bar);
goto err_iounmap;
}

--
2.11.0
\
 
 \ /
  Last update: 2017-08-18 17:01    [W:0.084 / U:9.308 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site