lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/5] iio: srf08: add sensor type srf10
On Wed, 16 Aug 2017 21:34:23 +0200
Andreas Klinger <ak@it-klinger.de> wrote:

> Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
> the driver as device tree compatible string.
>
> It was necessary to prepare the source for supplementary sensors. This is
> done by enum srf08_sensor_type.
>
> The most significiant difference between srf08 and srf10 is another range
> and values of register gain (in the driver it's call sensitivity).
> Therefore the array of it is extended and dependent of the sensor type.

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
>
> Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> ---
> drivers/iio/proximity/Kconfig | 4 +-
> drivers/iio/proximity/srf08.c | 90 +++++++++++++++++++++++++++++++++++--------
> 2 files changed, 77 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
> index 5b81a8c9d438..df33ccc0d035 100644
> --- a/drivers/iio/proximity/Kconfig
> +++ b/drivers/iio/proximity/Kconfig
> @@ -57,10 +57,10 @@ config SX9500
> module will be called sx9500.
>
> config SRF08
> - tristate "Devantech SRF08 ultrasonic ranger sensor"
> + tristate "Devantech SRF08/SRF10 ultrasonic ranger sensor"
> depends on I2C
> help
> - Say Y here to build a driver for Devantech SRF08 ultrasonic
> + Say Y here to build a driver for Devantech SRF08/SRF10 ultrasonic
> ranger sensor. This driver can be used to measure the distance
> of objects.
>
> diff --git a/drivers/iio/proximity/srf08.c b/drivers/iio/proximity/srf08.c
> index de699d67310a..1f9b03944da4 100644
> --- a/drivers/iio/proximity/srf08.c
> +++ b/drivers/iio/proximity/srf08.c
> @@ -1,5 +1,7 @@
> /*
> - * srf08.c - Support for Devantech SRF08 ultrasonic ranger
> + * srf08.c - Support for Devantech SRFxx ultrasonic ranger
> + * with i2c interface
> + * actually supported are srf08, srf10
> *
> * Copyright (c) 2016 Andreas Klinger <ak@it-klinger.de>
> *
> @@ -9,6 +11,7 @@
> *
> * For details about the device see:
> * http://www.robot-electronics.co.uk/htm/srf08tech.html
> + * http://www.robot-electronics.co.uk/htm/srf10tech.htm
> */
>
> #include <linux/err.h>
> @@ -33,9 +36,20 @@
>
> #define SRF08_CMD_RANGING_CM 0x51 /* Ranging Mode - Result in cm */
>
> -#define SRF08_DEFAULT_GAIN 1025 /* default analogue value of Gain */
> #define SRF08_DEFAULT_RANGE 6020 /* default value of Range in mm */
>
> +enum srf08_sensor_type {
> + SRF08,
> + SRF10,
> + SRF_MAX_TYPE
> +};
> +
> +struct srf08_chip_info {
> + const int *sensitivity_avail;
> + int num_sensitivity_avail;
> + int sensitivity_default;
> +};
> +
> struct srf08_data {
> struct i2c_client *client;
>
> @@ -54,6 +68,12 @@ struct srf08_data {
> * 1x16-bit channel + 3x16 padding + 4x16 timestamp
> */
> s16 buffer[8];
> +
> + /* Sensor-Type */
> + enum srf08_sensor_type sensor_type;
> +
> + /* Chip-specific information */
> + const struct srf08_chip_info *chip_info;
> };
>
> /*
> @@ -63,11 +83,30 @@ struct srf08_data {
> * But with ADC's this term is already used differently and that's why it
> * is called "Sensitivity" here.
> */
> -static const int srf08_sensitivity[] = {
> +static const int srf08_sensitivity_avail[] = {
> 94, 97, 100, 103, 107, 110, 114, 118,
> 123, 128, 133, 139, 145, 152, 159, 168,
> 177, 187, 199, 212, 227, 245, 265, 288,
> - 317, 352, 395, 450, 524, 626, 777, 1025 };
> + 317, 352, 395, 450, 524, 626, 777, 1025
> + };
> +
> +static const struct srf08_chip_info srf08_chip_info = {
> + .sensitivity_avail = srf08_sensitivity_avail,
> + .num_sensitivity_avail = ARRAY_SIZE(srf08_sensitivity_avail),
> + .sensitivity_default = 1025,
> +};
> +
> +static const int srf10_sensitivity_avail[] = {
> + 40, 40, 50, 60, 70, 80, 100, 120,
> + 140, 200, 250, 300, 350, 400, 500, 600,
> + 700,
> + };
> +
> +static const struct srf08_chip_info srf10_chip_info = {
> + .sensitivity_avail = srf10_sensitivity_avail,
> + .num_sensitivity_avail = ARRAY_SIZE(srf10_sensitivity_avail),
> + .sensitivity_default = 700,
> +};
>
> static int srf08_read_ranging(struct srf08_data *data)
> {
> @@ -264,9 +303,13 @@ static ssize_t srf08_show_sensitivity_available(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> int i, len = 0;
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct srf08_data *data = iio_priv(indio_dev);
>
> - for (i = 0; i < ARRAY_SIZE(srf08_sensitivity); i++)
> - len += sprintf(buf + len, "%d ", srf08_sensitivity[i]);
> + for (i = 0; i < data->chip_info->num_sensitivity_avail; i++)
> + if (data->chip_info->sensitivity_avail[i])
> + len += sprintf(buf + len, "%d ",
> + data->chip_info->sensitivity_avail[i]);
>
> len += sprintf(buf + len, "\n");
>
> @@ -295,19 +338,21 @@ static ssize_t srf08_write_sensitivity(struct srf08_data *data,
> int ret, i;
> u8 regval;
>
> - for (i = 0; i < ARRAY_SIZE(srf08_sensitivity); i++)
> - if (val == srf08_sensitivity[i]) {
> + if (!val)
> + return -EINVAL;
> +
> + for (i = 0; i < data->chip_info->num_sensitivity_avail; i++)
> + if (val && (val == data->chip_info->sensitivity_avail[i])) {
> regval = i;
> break;
> }
>
> - if (i >= ARRAY_SIZE(srf08_sensitivity))
> + if (i >= data->chip_info->num_sensitivity_avail)
> return -EINVAL;
>
> mutex_lock(&data->lock);
>
> - ret = i2c_smbus_write_byte_data(client,
> - SRF08_WRITE_MAX_GAIN, regval);
> + ret = i2c_smbus_write_byte_data(client, SRF08_WRITE_MAX_GAIN, regval);
> if (ret < 0) {
> dev_err(&client->dev, "write_sensitivity - err: %d\n", ret);
> mutex_unlock(&data->lock);
> @@ -399,8 +444,20 @@ static int srf08_probe(struct i2c_client *client,
> data = iio_priv(indio_dev);
> i2c_set_clientdata(client, indio_dev);
> data->client = client;
> + data->sensor_type = (enum srf08_sensor_type)id->driver_data;
> +
> + switch (data->sensor_type) {
> + case SRF08:
> + data->chip_info = &srf08_chip_info;
> + break;
> + case SRF10:
> + data->chip_info = &srf10_chip_info;
> + break;
> + default:
> + return -EINVAL;
> + }
>
> - indio_dev->name = "srf08";
> + indio_dev->name = id->name;
> indio_dev->dev.parent = &client->dev;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &srf08_info;
> @@ -425,7 +482,8 @@ static int srf08_probe(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> - ret = srf08_write_sensitivity(data, SRF08_DEFAULT_GAIN);
> + ret = srf08_write_sensitivity(data,
> + data->chip_info->sensitivity_default);
> if (ret < 0)
> return ret;
>
> @@ -433,14 +491,16 @@ static int srf08_probe(struct i2c_client *client,
> }
>
> static const struct of_device_id of_srf08_match[] = {
> - { .compatible = "devantech,srf08", 0},
> + { .compatible = "devantech,srf08", (void *)SRF08},
> + { .compatible = "devantech,srf10", (void *)SRF10},
> {},
> };
>
> MODULE_DEVICE_TABLE(of, of_srf08_match);
>
> static const struct i2c_device_id srf08_id[] = {
> - { "srf08", 0 },
> + { "srf08", SRF08 },
> + { "srf10", SRF10 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, srf08_id);

\
 
 \ /
  Last update: 2017-08-18 09:05    [W:0.041 / U:18.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site