lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 2/3] MIPS: dts: Add VoCore2 board
From
Date
Hi Rob,

Thanks for the review.

On 17/08/17 22:36, Rob Herring wrote:
> On Tue, Aug 15, 2017 at 05:32:52PM +0100, Harvey Hunt wrote:
>> The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB
>> flash and multiple external peripherals.
>>
>> This initial DTS provides enough support to get to userland and use the USB
>> port.
>>
>> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
>> Cc: linux-kernel@vger.kernel.org
>> Cc: devicetree@vger.kernel.org
>> Cc: linux-mips@linux-mips.org
>> ---
>> MAINTAINERS | 6 ++++++
>> arch/mips/boot/dts/ralink/Makefile | 1 +
>> arch/mips/boot/dts/ralink/vocore2.dts | 18 ++++++++++++++++++
>> arch/mips/ralink/Kconfig | 5 +++++
>> 4 files changed, 30 insertions(+)
>> create mode 100644 arch/mips/boot/dts/ralink/vocore2.dts
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 6f7721d..82dcc6f 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14127,6 +14127,12 @@ L: netdev@vger.kernel.org
>> S: Maintained
>> F: drivers/net/vmxnet3/
>>
>> +VOCORE VOCORE2 BOARD
>> +M: Harvey Hunt <harveyhuntnexus@gmail.com>
>> +L: linux-mips@linux-mips.org
>> +S: Maintained
>> +F: arch/mips/boot/dts/ralink/vocore2.dts
>> +
>> VOLTAGE AND CURRENT REGULATOR FRAMEWORK
>> M: Liam Girdwood <lgirdwood@gmail.com>
>> M: Mark Brown <broonie@kernel.org>
>> diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
>> index 2a72259..a191788 100644
>> --- a/arch/mips/boot/dts/ralink/Makefile
>> +++ b/arch/mips/boot/dts/ralink/Makefile
>> @@ -2,6 +2,7 @@ dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
>> dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
>> dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
>> dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
>> +dtb-$(CONFIG_DTB_VOCORE2) += vocore2.dtb
>>
>> obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
>>
>> diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts
>> new file mode 100644
>> index 0000000..7591340
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/ralink/vocore2.dts
>> @@ -0,0 +1,18 @@
>> +/dts-v1/;
>> +
>> +#include "mt7628a.dtsi"
>> +
>> +/ {
>> + compatible = "vocore,vocore2", "ralink,mt7628a-soc";
>
> Is vocore,vocore2 documented?

It's not, do you want me to add a file in
Documentation/devicetree/bindings/mips?

If so, shall I just create a vocore.txt file or create a "vocore"
directory with vocore2.txt in it?

Thanks,

Harvey

>
>> + model = "VoCore2";
>> +
>> + memory@0 {
>> + device_type = "memory";
>> + reg = <0x0 0x8000000>;
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyS2,115200";
>> + stdout-path = "serial2:115200";
>> + };
>> +};
>> diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
>> index 710b04c..c2b2c2d 100644
>> --- a/arch/mips/ralink/Kconfig
>> +++ b/arch/mips/ralink/Kconfig
>> @@ -82,6 +82,11 @@ choice
>> depends on SOC_MT7620
>> select BUILTIN_DTB
>>
>> + config DTB_VOCORE2
>> + bool "VoCore2"
>> + depends on SOC_MT7620
>> + select BUILTIN_DTB
>> +
>> endchoice
>>
>> endif
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2017-08-18 15:23    [W:0.048 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site