lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: ls1088a: Add USB support
On Fri, Aug 18, 2017 at 04:14:45PM +0800, yinbo.zhu@nxp.com wrote:
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
>
> Fix the issue that usb is not detected on ls1088ardb
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

You are sending an updated patch. Please have the version number in
subject prefix ...

> ---

... and a change history here. There are a lot of good examples on the
list. Please have a check.

> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 213abb7..6c3c3bc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -118,6 +118,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };

I had already put this on previous version - please sort these labelled
nodes alphabetically. That said, &usb should go after &sata.

Shawn

\
 
 \ /
  Last update: 2017-08-18 15:04    [W:0.046 / U:9.772 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site