lkml.org 
[lkml]   [2017]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/4] Add Broadcom STB USB phy driver
From
Date


On 07/21/2017 07:10 AM, Al Cooper wrote:
> Add a new USB Phy driver for Broadcom STB SoCs. This driver
> supports Broadcom STB ARM SoCs. This driver in
> combination with the Broadcom STB ohci, ehci and xhci
> drivers will enable USB1.1, USB2.0 and USB3.0 support.
> This Phy driver also supports the Broadcom BDC gadget
> driver.

Kishon can we get some timely feedback on this please? Thanks

>
> Changes since v3:
> - Removed MIPS support because there is such a small
> amount of code that is common to both ARM and MIPS.
> I'll create a separate MIPS driver in the future.
> - Have the Kconfig selection for this driver also select
> "CONFIG_SOC_BRCMSTB" which contains needed functions.
> - Change device tree properties to use "brcm,has_xhci" and
> "brcm,has_eohci" to determine if the phy contains
> a xhci phy, and e/ohci phy or both.
> - Change the phy xlate routine to return an error instead
> of NULL for a requested phy that doesn't exist.
> - Moved some probe functionality into it's own funtion to
> simplify the many "if (has_xhci)" statements.
>
> Changes since v2:
> - Fix kbuild errors by changing Kconfig so the driver
> only builds for ARCH_BRCMSTB || BMIPS_GENERIC systems
>
> Changes since v1:
> - Rebased to next
> - Add Kconfig entry to build the driver
> - Commented all delays
> - Split out sysfs functionality in separate patch
> - Removed parsing of old obselete device tree properties
> - Changed device property "device" to "dr_mode" using
> standard values "host" and "peripheral" along with new
> values "drd" and "typec-pd"
> - Add ability to handle the standard PHY_TYPE_USB2 and
> PHY_TYPE_USB3 arguments passed in by phy consumers.
> - Moved phy_provider_register() to end of probe routine
>
> Al Cooper (4):
> soc: brcmstb: Add Product ID and Family ID helper functions
> dt-bindings: Add Broadcom STB USB PHY binding document
> phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver
> phy: usb: phy-brcm-usb: Add ability to force DRD mode to host or
> device
>
> .../bindings/phy/brcm,brcmstb-usb-phy.txt | 43 +
> MAINTAINERS | 7 +
> drivers/phy/broadcom/Kconfig | 13 +
> drivers/phy/broadcom/Makefile | 3 +
> drivers/phy/broadcom/phy-brcm-usb-init.c | 1034 ++++++++++++++++++++
> drivers/phy/broadcom/phy-brcm-usb-init.h | 50 +
> drivers/phy/broadcom/phy-brcm-usb.c | 460 +++++++++
> drivers/soc/bcm/brcmstb/common.c | 12 +
> include/linux/soc/brcmstb/brcmstb.h | 10 +
> 9 files changed, 1632 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
> create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init.c
> create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init.h
> create mode 100644 drivers/phy/broadcom/phy-brcm-usb.c
>

--
Florian

\
 
 \ /
  Last update: 2017-08-18 07:32    [W:0.125 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site