lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/6] perf: hisi: Add support for HiSilicon SoC L3C PMU driver
From
Date
Hi Mark,

On 2017/8/15 18:41, Mark Rutland wrote:
> On Tue, Jul 25, 2017 at 08:10:39PM +0800, Shaokun Zhang wrote:
>> This patch adds support for L3C PMU driver in HiSilicon SoC chip, Each
>> L3C has own control, counter and interrupt registers and is an separate
>> PMU. For each L3C PMU, it has 8-programable counters and supports 0x60
>> events, event code is 8-bits and every counter is free-running.
>> Interrupt is supported to handle counter (48-bits) overflow.
>
> [...]
>
>> +/* L3C register definition */
>> +#define L3C_PERF_CTRL 0x0408
>> +#define L3C_INT_MASK 0x0800
>> +#define L3C_INT_STATUS 0x0808
>> +#define L3C_INT_CLEAR 0x080c
>> +#define L3C_EVENT_CTRL 0x1c00
>> +#define L3C_EVENT_TYPE0 0x1d00
>> +#define L3C_CNTR0_LOWER 0x1e00
>
> Why does this have a _LOWER suffix?
>
> How big is this regsiter? is it part of a pair of registers?
>

Each counter is 48-bits, for counter0, the register offset of the lower
32-bits is 0x1e00 and the higher 16-bits is in 0x1e04 (while the upper
16-bits is reserved for 0x1e04, RAZ and WI), other counters are the same.

>> +
>> +/* L3C has 8-counters and supports 0x60 events */
>> +#define L3C_NR_COUNTERS 0x8
>> +#define L3C_NR_EVENTS 0x60
>
> What exactly is meant by "supports 0x60 events"?
>
> e.g. does tha mean event IDs 0-0x5f are valid?
>

It is event IDs, my apologies to describe it vaguely.

>> +static irqreturn_t hisi_l3c_pmu_isr(int irq, void *dev_id)
>> +{
>> + struct hisi_pmu *l3c_pmu = dev_id;
>> + struct perf_event *event;
>> + unsigned long overflown;
>> + u32 status;
>> + int idx;
>> +
>> + /* Read L3C_INT_STATUS register */
>> + status = readl(l3c_pmu->base + L3C_INT_STATUS);
>> + if (!status)
>> + return IRQ_NONE;
>> + overflown = status;
>
> You don't need the temporary u32 value here; you can assign directly to
> an unsigned lnog and do all the manipulation on that.
>

Ok.

> [...]
>
>> +/* Check if the CPU belongs to the SCCL and CCL of PMU */
>> +static bool hisi_l3c_is_cpu_in_ccl(struct hisi_pmu *l3c_pmu)
>> +{
>> + u32 ccl_id, sccl_id;
>> +
>> + hisi_read_sccl_and_ccl_id(&sccl_id, &ccl_id);
>> +
>> + if (sccl_id != l3c_pmu->sccl_id)
>> + return false;
>> +
>> + if (ccl_id != l3c_pmu->ccl_id)
>> + return false;
>> +
>> + /* Return true if matched */
>> + return true;
>> +}
>
> The conditionals would be simpler as:
>
> return (sccl_id == l3c_pmu->sccl_id &&
> ccl_id == l3c_pmu->ccl_id);
>

Ok.

>> +
>> +static int hisi_l3c_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
>> +{
>> + struct hisi_pmu *l3c_pmu;
>> +
>> + l3c_pmu = hlist_entry_safe(node, struct hisi_pmu, node);
>> +
>> + /* Proceed only when CPU belongs to the same SCCL and CCL */
>> + if (!hisi_l3c_is_cpu_in_ccl(l3c_pmu))
>> + return 0;
>
> Surely you have a mask of CPUs that you can check instead? You'll need
> that for the offline path.
>

Ok, Shall create the cpumask and update it during CPU hotplug callback.

> [...]
>
>> +static int hisi_l3c_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
>> +{
>> + struct hisi_pmu *l3c_pmu;
>> + cpumask_t ccl_online_cpus;
>> + unsigned int target;
>> +
>> + l3c_pmu = hlist_entry_safe(node, struct hisi_pmu, node);
>> +
>> + /* Proceed only when CPU belongs to the same SCCL and CCL */
>> + if (!hisi_l3c_is_cpu_in_ccl(l3c_pmu))
>> + return 0;
>
> Again, surely you can check a pre-computed mask?
>

Ok.

>> +
>> + /* Proceed if this CPU is used for event counting */
>> + if (!cpumask_test_cpu(cpu, &l3c_pmu->cpus))
>> + return 0;
>
> You need to set up the CPU state regardless of whether there are active
> events currently. Otherwise the cpumask can be stale, pointing at an
> offline CPU, leaving the PMU unusable.
>

Ok. Shall update the cpumask and also hisi_pmu::init cpu to hold the next
online CPU

>> +
>> + /* Give up ownership of CCL */
>> + cpumask_test_and_clear_cpu(cpu, &l3c_pmu->cpus);
>> +
>> + /* Any other CPU for this CCL which is still online */
>> + cpumask_and(&ccl_online_cpus, cpu_coregroup_mask(cpu),
>> + cpu_online_mask);
>
> What is cpu_coregroup_mask? I do not think you can rely on that
> happening to align with the physical CCL mask.
>

The cpu_coregroup_mask return the CPU cores within the cluster. So we used this.

> Instead, please:
>
> * Keep track of which CPU(s) this PMU can be used from, with a cpumask.
> Either initialise that at probe time, or add CPUs to that in the
> hotplug callback.
>
> * Use only that mask to determine which CPU to move the PMU context to.
>
> * Use an int to hold the current CPU; there's no need to use a mask to
> hold what shoule be a single CPU ID.
>

Shall modify as suggested.

> [...]
>
>> + /* Get the L3C SCCL ID */
>> + if (device_property_read_u32(dev, "hisilicon,scl-id",
>> + &l3c_pmu->sccl_id)) {
>> + dev_err(dev, "Can not read l3c sccl-id!\n");
>> + return -EINVAL;
>> + }
>> +
>> + /* Get the L3C CPU cluster(CCL) ID */
>> + if (device_property_read_u32(dev, "hisilicon,ccl-id",
>> + &l3c_pmu->ccl_id)) {
>> + dev_err(dev, "Can not read l3c ccl-id!\n");
>> + return -EINVAL;
>> + }
>
> Previously, you expect that these happen to match particular bits of the
> MPIDR, which vary for multi-threaded cores. Please document this.
>

Ok.

>> +static int hisi_l3c_pmu_dev_probe(struct platform_device *pdev,
>> + struct hisi_pmu *l3c_pmu)
>> +{
>> + struct device *dev = &pdev->dev;
>> + int ret;
>> +
>> + ret = hisi_l3c_pmu_init_data(pdev, l3c_pmu);
>> + if (ret)
>> + return ret;
>> +
>> + ret = hisi_l3c_pmu_init_irq(l3c_pmu, pdev);
>> + if (ret)
>> + return ret;
>> +
>> + l3c_pmu->name = devm_kasprintf(dev, GFP_KERNEL, "hisi_l3c%u_%u",
>> + l3c_pmu->l3c_tag_id, l3c_pmu->sccl_id);
>
> As mentioned on the documentation patch, it would be nicer for the name
> to be hierarchical, i.e. placing the SCCL ID first.
>

Surely.

Thanks.
Shaokun

> Thanks,
> Mark.
> _______________________________________________
> linuxarm mailing list
> linuxarm@huawei.com
> http://rnd-openeuler.huawei.com/mailman/listinfo/linuxarm
>
> .
>

\
 
 \ /
  Last update: 2017-08-17 05:32    [W:0.118 / U:7.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site