lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/1] usb:host:xhci support option to disable the xHCI USB2 HW LPM
On Tue, Aug 8, 2017 at 11:27 AM, Thang Q. Nguyen <tqnguyen@apm.com> wrote:
> XHCI specification 1.1 does not require xHCI-compliant controllers
> to always enable hardware USB2 LPM. However, the current xHCI
> driver always enable it when seeing HLC=1.
> This patch supports an option for users to control disabling
> USB2 Hardware LPM via DT/ACPI attribute.
> This option is needed in case user would like to disable this
> feature. For example, their xHCI controller has its USB2 HW LPM
> broken.
>
> Signed-off-by: Tung Nguyen <tunguyen@apm.com>
> Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes since v4:
> - When HW LPM is optionally disabled, explicitly disable HLE, RWE, ...
> - Update codes to work with kernel 4.13-rc4
> - Add Acked-By from Rob Herring <robh@kernel.org>
> Changes since v3:
> - Bypass updating LPM parameters when HW LPM is optionally disabled.
> Changes since v2:
> - Change code to disable HW LPM as an option for user which
> is set via ACPI/DT.
> Changes since v1:
> - Update DT/ACPI attribute and corresponding codes from HLE to LPM to
> be consistent with other attribute names.
> ---
> Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
> drivers/usb/host/xhci-plat.c | 3 +++
> drivers/usb/host/xhci.c | 2 +-
> drivers/usb/host/xhci.h | 1 +
> 4 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> index 2d80b60..ae6e484 100644
> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> @@ -26,6 +26,7 @@ Required properties:
>
> Optional properties:
> - clocks: reference to a clock
> + - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
> - usb3-lpm-capable: determines if platform is USB3 LPM capable
> - quirk-broken-port-ped: set if the controller has broken port disable mechanism
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index c04144b..9028fb5 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -267,6 +267,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> goto disable_clk;
> }
>
> + if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
> + xhci->quirks |= XHCI_HW_LPM_DISABLE;
> +
> if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
> xhci->quirks |= XHCI_LPM_SUPPORT;
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index b2ff1ff..3a8e75f 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4087,7 +4087,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
> xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
> enable ? "enable" : "disable", port_num + 1);
>
> - if (enable) {
> + if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) {
> /* Host supports BESL timeout instead of HIRD */
> if (udev->usb2_hw_lpm_besl_capable) {
> /* if device doesn't have a preferred BESL value use a
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index e3e9352..5d89c51 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1821,6 +1821,7 @@ struct xhci_hcd {
> #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
> #define XHCI_U2_DISABLE_WAKE (1 << 27)
> #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
> +#define XHCI_HW_LPM_DISABLE (1 << 29)
>
> unsigned int num_active_eps;
> unsigned int limit_active_eps;
> --
> 1.7.1
>

Do you have any comments about this patch? Thanks.

\
 
 \ /
  Last update: 2017-08-17 05:20    [W:0.052 / U:1.196 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site