lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/5] reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967
From
Date
Hi Philipp,

sorry for the delay, I was on holidays.
Thanks for putting together the series, this looks very good to me.

One comment below...

On 16/08/17 10:46, Philipp Zabel wrote:
> Split reusable parts out of the sunxi driver, to add a driver for simple
> reset controllers with reset lines that can be controlled by toggling
> bits in exclusive, contiguous register ranges using read-modify-write
> cycles under a spinlock. The separate sunxi driver still remains to
> register the early reset controllers, but it reuses the reset-simple
> ops.
>
> The following patches will replace compatible reset drivers with
> reset-simple, extending it where necessary.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> Changes since v2:
> - Add kerneldoc comment for struct reset_simple_devdata and struct
> reset_simple_data.
> - Rename "inverted" properties to "active_low".
> - Use of_device_get_match_data instead of of_match_device.
> ---
> drivers/reset/Kconfig | 11 ++++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-simple.c | 134 +++++++++++++++++++++++++++++++++++++++++++
> drivers/reset/reset-simple.h | 41 +++++++++++++
> drivers/reset/reset-sunxi.c | 104 ++-------------------------------
> 5 files changed, 193 insertions(+), 98 deletions(-)
> create mode 100644 drivers/reset/reset-simple.c
> create mode 100644 drivers/reset/reset-simple.h
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 52d5251660b9b..f7ba01a71daee 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -68,6 +68,16 @@ config RESET_PISTACHIO
> help
> This enables the reset driver for ImgTec Pistachio SoCs.
>
> +config RESET_SIMPLE
> + bool "Simple Reset Controller Driver" if COMPILE_TEST
> + default ARCH_SUNXI
> + help
> + This enables a simple reset controller driver for reset lines that
> + that can be asserted and deasserted by toggling bits in a contiguous,
> + exclusive register space.
> +
> + Currently this driver supports Allwinner SoCs.
> +
> config RESET_SOCFPGA
> bool "SoCFPGA Reset Driver" if COMPILE_TEST
> default ARCH_SOCFPGA
> @@ -83,6 +93,7 @@ config RESET_STM32
> config RESET_SUNXI
> bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
> default ARCH_SUNXI
> + select RESET_SIMPLE
> help
> This enables the reset driver for Allwinner SoCs.
>
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index b62783f50fe5b..ab4af99c3dfdc 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> obj-$(CONFIG_RESET_MESON) += reset-meson.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> +obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
> obj-$(CONFIG_RESET_STM32) += reset-stm32.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
> new file mode 100644
> index 0000000000000..70c57c0758c39
> --- /dev/null
> +++ b/drivers/reset/reset-simple.c
> @@ -0,0 +1,134 @@
> +/*
> + * Simple Reset Controller Driver
> + *
> + * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
> + *
> + * Based on Allwinner SoCs Reset Controller driver
> + *
> + * Copyright 2013 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/spinlock.h>
> +
> +#include "reset-simple.h"
> +
> +static inline struct reset_simple_data *
> +to_reset_simple_data(struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct reset_simple_data, rcdev);
> +}
> +
> +static int reset_simple_set(struct reset_controller_dev *rcdev,
> + unsigned long id, bool assert)
> +{
> + struct reset_simple_data *data = to_reset_simple_data(rcdev);
> + int reg_width = sizeof(u32);
> + int bank = id / (reg_width * BITS_PER_BYTE);
> + int offset = id % (reg_width * BITS_PER_BYTE);
> + unsigned long flags;
> + u32 reg;
> +
> + spin_lock_irqsave(&data->lock, flags);
> +
> + reg = readl(data->membase + (bank * reg_width));
> + if (assert ^ data->active_low)
> + reg |= BIT(offset);
> + else
> + reg &= ~BIT(offset);
> + writel(reg, data->membase + (bank * reg_width));
> +
> + spin_unlock_irqrestore(&data->lock, flags);
> +
> + return 0;
> +}
> +
> +static int reset_simple_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return reset_simple_set(rcdev, id, true);
> +}
> +
> +static int reset_simple_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return reset_simple_set(rcdev, id, false);
> +}
> +
> +const struct reset_control_ops reset_simple_ops = {
> + .assert = reset_simple_assert,
> + .deassert = reset_simple_deassert,
> +};
> +
> +/**
> + * struct reset_simple_devdata - simple reset controller properties
> + * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
> + * are set to assert the reset.
> + */
> +struct reset_simple_devdata {
> + bool active_low;
> +};
> +
> +static const struct reset_simple_devdata reset_simple_active_low = {
> + .active_low = true,
> +};
> +
> +static const struct of_device_id reset_simple_dt_ids[] = {
> + { .compatible = "allwinner,sun6i-a31-clock-reset",
> + .data = &reset_simple_active_low },

Can we have a additional generic compatible string here? New users of
this driver then wouldn't need to explicitly enter their name into the
driver, but could just use the generic name as a fallback. This would
enable the driver without any Linux code change just by adding a DT node.

compatible = "nexell,s5p6818-reset", "simple-reset";

Whenever we need a quirk (now or in the future), we can add the specific
name into this structure along with the required workarounds.

Cheers,
Andre.

> + { /* sentinel */ },
> +};
> +
> +static int reset_simple_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct reset_simple_devdata *devdata;
> + struct reset_simple_data *data;
> + void __iomem *membase;
> + struct resource *res;
> +
> + devdata = of_device_get_match_data(dev);
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + membase = devm_ioremap_resource(dev, res);
> + if (IS_ERR(membase))
> + return PTR_ERR(membase);
> +
> + spin_lock_init(&data->lock);
> + data->membase = membase;
> + data->rcdev.owner = THIS_MODULE;
> + data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
> + data->rcdev.ops = &reset_simple_ops;
> + data->rcdev.of_node = dev->of_node;
> +
> + if (devdata)
> + data->active_low = devdata->active_low;
> +
> + return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
> +static struct platform_driver reset_simple_driver = {
> + .probe = reset_simple_probe,
> + .driver = {
> + .name = "simple-reset",
> + .of_match_table = reset_simple_dt_ids,
> + },
> +};
> +builtin_platform_driver(reset_simple_driver);
> diff --git a/drivers/reset/reset-simple.h b/drivers/reset/reset-simple.h
> new file mode 100644
> index 0000000000000..39af2014b5f12
> --- /dev/null
> +++ b/drivers/reset/reset-simple.h
> @@ -0,0 +1,41 @@
> +/*
> + * Simple Reset Controller ops
> + *
> + * Based on Allwinner SoCs Reset Controller driver
> + *
> + * Copyright 2013 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __RESET_SIMPLE_H__
> +#define __RESET_SIMPLE_H__
> +
> +#include <linux/io.h>
> +#include <linux/reset-controller.h>
> +#include <linux/spinlock.h>
> +
> +/**
> + * struct reset_simple_data - driver data for simple reset controllers
> + * @lock: spinlock to protect registers during read-modify-write cycles
> + * @membase: memory mapped I/O register range
> + * @rcdev: reset controller device base structure
> + * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
> + * are set to assert the reset. Note that this says nothing about
> + * the voltage level of the actual reset line.
> + */
> +struct reset_simple_data {
> + spinlock_t lock;
> + void __iomem *membase;
> + struct reset_controller_dev rcdev;
> + bool active_low;
> +};
> +
> +extern const struct reset_control_ops reset_simple_ops;
> +
> +#endif /* __RESET_SIMPLE_H__ */
> diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
> index 2c7dd1fd08df6..db9a1a75523f4 100644
> --- a/drivers/reset/reset-sunxi.c
> +++ b/drivers/reset/reset-sunxi.c
> @@ -22,64 +22,11 @@
> #include <linux/spinlock.h>
> #include <linux/types.h>
>
> -struct sunxi_reset_data {
> - spinlock_t lock;
> - void __iomem *membase;
> - struct reset_controller_dev rcdev;
> -};
> -
> -static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
> - unsigned long id)
> -{
> - struct sunxi_reset_data *data = container_of(rcdev,
> - struct sunxi_reset_data,
> - rcdev);
> - int reg_width = sizeof(u32);
> - int bank = id / (reg_width * BITS_PER_BYTE);
> - int offset = id % (reg_width * BITS_PER_BYTE);
> - unsigned long flags;
> - u32 reg;
> -
> - spin_lock_irqsave(&data->lock, flags);
> -
> - reg = readl(data->membase + (bank * reg_width));
> - writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
> -
> - spin_unlock_irqrestore(&data->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
> - unsigned long id)
> -{
> - struct sunxi_reset_data *data = container_of(rcdev,
> - struct sunxi_reset_data,
> - rcdev);
> - int reg_width = sizeof(u32);
> - int bank = id / (reg_width * BITS_PER_BYTE);
> - int offset = id % (reg_width * BITS_PER_BYTE);
> - unsigned long flags;
> - u32 reg;
> -
> - spin_lock_irqsave(&data->lock, flags);
> -
> - reg = readl(data->membase + (bank * reg_width));
> - writel(reg | BIT(offset), data->membase + (bank * reg_width));
> -
> - spin_unlock_irqrestore(&data->lock, flags);
> -
> - return 0;
> -}
> -
> -static const struct reset_control_ops sunxi_reset_ops = {
> - .assert = sunxi_reset_assert,
> - .deassert = sunxi_reset_deassert,
> -};
> +#include "reset-simple.h"
>
> static int sunxi_reset_init(struct device_node *np)
> {
> - struct sunxi_reset_data *data;
> + struct reset_simple_data *data;
> struct resource res;
> resource_size_t size;
> int ret;
> @@ -108,8 +55,9 @@ static int sunxi_reset_init(struct device_node *np)
>
> data->rcdev.owner = THIS_MODULE;
> data->rcdev.nr_resets = size * 8;
> - data->rcdev.ops = &sunxi_reset_ops;
> + data->rcdev.ops = &reset_simple_ops;
> data->rcdev.of_node = np;
> + data->active_low = true;
>
> return reset_controller_register(&data->rcdev);
>
> @@ -122,6 +70,8 @@ static int sunxi_reset_init(struct device_node *np)
> * These are the reset controller we need to initialize early on in
> * our system, before we can even think of using a regular device
> * driver for it.
> + * The controllers that we can register through the regular device
> + * model are handled by the simple reset driver directly.
> */
> static const struct of_device_id sunxi_early_reset_dt_ids[] __initconst = {
> { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
> @@ -135,45 +85,3 @@ void __init sun6i_reset_init(void)
> for_each_matching_node(np, sunxi_early_reset_dt_ids)
> sunxi_reset_init(np);
> }
> -
> -/*
> - * And these are the controllers we can register through the regular
> - * device model.
> - */
> -static const struct of_device_id sunxi_reset_dt_ids[] = {
> - { .compatible = "allwinner,sun6i-a31-clock-reset", },
> - { /* sentinel */ },
> -};
> -
> -static int sunxi_reset_probe(struct platform_device *pdev)
> -{
> - struct sunxi_reset_data *data;
> - struct resource *res;
> -
> - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> - if (!data)
> - return -ENOMEM;
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - data->membase = devm_ioremap_resource(&pdev->dev, res);
> - if (IS_ERR(data->membase))
> - return PTR_ERR(data->membase);
> -
> - spin_lock_init(&data->lock);
> -
> - data->rcdev.owner = THIS_MODULE;
> - data->rcdev.nr_resets = resource_size(res) * 8;
> - data->rcdev.ops = &sunxi_reset_ops;
> - data->rcdev.of_node = pdev->dev.of_node;
> -
> - return devm_reset_controller_register(&pdev->dev, &data->rcdev);
> -}
> -
> -static struct platform_driver sunxi_reset_driver = {
> - .probe = sunxi_reset_probe,
> - .driver = {
> - .name = "sunxi-reset",
> - .of_match_table = sunxi_reset_dt_ids,
> - },
> -};
> -builtin_platform_driver(sunxi_reset_driver);
>

\
 
 \ /
  Last update: 2017-08-16 13:31    [W:0.130 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site