lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/7] Add rk3328 pwm support
From
Date
Hi Thierry,

For the PWM patches, whether we let the first patch land in, that is PWM
APB and function clocks are different in rk3328 and rv1108 SOCs. If the
first patch was merged before 4.14, it will guarantee that the PWM is
working, and the lock function you might review it later.

在 2017/8/8 23:38, David Wu 写道:
> There are two features of rk3328 pwm module.
> - PWM APB and function clocks are different.
> - Add pwm atomic hardware update
>
> David Wu (7):
> pwm: rockchip: Add APB and function both clocks support
> pwm: rockchip: Remove the judge from return value of pwm_config
> pwm: rockchip: Use pwm_apply instead of the pwm_enable
> pwm: rockchip: Move the configuration of polarity from
> rockchip_pwm_set_enable() to rockchip_pwm_config()
> pwm: rockchip: Use same pwm ops for each IP
> pwm: rockchip: Add rk3328 pwm support
> arm64: dts: rockchip: Add pwm nodes for rk3328
>
> .../devicetree/bindings/pwm/pwm-rockchip.txt | 8 +-
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 45 ++++
> drivers/pwm/pwm-rockchip.c | 281 +++++++++++----------
> 3 files changed, 199 insertions(+), 135 deletions(-)
>

\
 
 \ /
  Last update: 2017-08-16 12:50    [W:0.130 / U:6.168 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site