lkml.org 
[lkml]   [2017]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] staging: typec: tcpm: Report right typec_pwr_opmode
From
Date
On 08/15/2017 04:22 PM, Badhri Jagan Sridharan wrote:
> At present, TCPM does not take into account the actual resistor
> value presented in the CC line and therefore reports TYPEC_PWR_MODE_USB
> irrespective of the power_op_mode it is in.
> This patch makes TCPM consider the actual value of Rp.
>
> Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> drivers/staging/typec/tcpm.c | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
> index 20eb4ebcf8c3..a24e6bbb909c 100644
> --- a/drivers/staging/typec/tcpm.c
> +++ b/drivers/staging/typec/tcpm.c
> @@ -2123,9 +2123,23 @@ static void tcpm_swap_complete(struct tcpm_port *port, int result)
> }
> }
>
> +enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
> +{
> + switch (cc) {
> + case TYPEC_CC_RP_1_5:
> + return TYPEC_PWR_MODE_1_5A;
> + case TYPEC_CC_RP_3_0:
> + return TYPEC_PWR_MODE_3_0A;
> + case TYPEC_CC_RP_DEF:
> + default:
> + return TYPEC_PWR_MODE_USB;
> + }
> +}
> +
> static void run_state_machine(struct tcpm_port *port)
> {
> int ret;
> + enum typec_pwr_opmode opmode;
>
> port->enter_state = port->state;
> switch (port->state) {
> @@ -2201,7 +2215,8 @@ static void run_state_machine(struct tcpm_port *port)
> ret < 0 ? 0 : PD_T_PS_SOURCE_ON);
> break;
> case SRC_STARTUP:
> - typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
> + opmode = tcpm_get_pwr_opmode(tcpm_rp_cc(port));
> + typec_set_pwr_opmode(port->typec_port, opmode);
> port->pwr_opmode = TYPEC_PWR_MODE_USB;
> port->caps_count = 0;
> port->message_id = 0;
> @@ -2362,7 +2377,9 @@ static void run_state_machine(struct tcpm_port *port)
> break;
> case SNK_STARTUP:
> /* XXX: callback into infrastructure */
> - typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
> + opmode = tcpm_get_pwr_opmode(port->polarity ?
> + port->cc2 : port->cc1);
> + typec_set_pwr_opmode(port->typec_port, opmode);
> port->pwr_opmode = TYPEC_PWR_MODE_USB;
> port->message_id = 0;
> port->rx_msgid = -1;
>

\
 
 \ /
  Last update: 2017-08-16 05:29    [W:0.041 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site