lkml.org 
[lkml]   [2017]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] media: ov7670: Add the s_power operation
Hi Wenyou,

On Thu, Aug 10, 2017 at 05:06:45PM +0800, Wenyou Yang wrote:
> Add the s_power operation which is responsible for manipulating the
> power dowm mode through the PWDN pin and the reset operation through
> the RESET pin.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> drivers/media/i2c/ov7670.c | 30 +++++++++++++++++++++++++++---
> 1 file changed, 27 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index 5c8460ee65c3..5ed79ccfaf91 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -1506,6 +1506,22 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis
> }
> #endif
>
> +static int ov7670_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct ov7670_info *info = to_state(sd);
> +
> + if (info->pwdn_gpio)
> + gpiod_direction_output(info->pwdn_gpio, !on);

gpiod_direction_output() can cope with NULL gpio_desc.

> + if (on && info->resetb_gpio) {
> + gpiod_set_value(info->resetb_gpio, 1);
> + usleep_range(500, 1000);
> + gpiod_set_value(info->resetb_gpio, 0);
> + usleep_range(3000, 5000);
> + }
> +
> + return 0;
> +}
> +
> /* ----------------------------------------------------------------------- */
>
> static const struct v4l2_subdev_core_ops ov7670_core_ops = {
> @@ -1515,6 +1531,7 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = {
> .g_register = ov7670_g_register,
> .s_register = ov7670_s_register,
> #endif
> + .s_power = ov7670_s_power,
> };
>
> static const struct v4l2_subdev_video_ops ov7670_video_ops = {
> @@ -1568,8 +1585,6 @@ static int ov7670_init_gpio(struct i2c_client *client, struct ov7670_info *info)
> return PTR_ERR(info->resetb_gpio);
> }
>
> - usleep_range(3000, 5000);
> -
> return 0;
> }
>
> @@ -1630,13 +1645,19 @@ static int ov7670_probe(struct i2c_client *client,
> goto clk_disable;
> }
>
> + ret = ov7670_init_gpio(client, info);

ov7670_init_gpio() is already called a few lines above this. Was this
intended?

> + if (ret)
> + goto clk_disable;
> +
> + ov7670_s_power(sd, 1);
> +
> /* Make sure it's an ov7670 */
> ret = ov7670_detect(sd);
> if (ret) {
> v4l_dbg(1, debug, client,
> "chip found @ 0x%x (%s) is not an ov7670 chip.\n",
> client->addr << 1, client->adapter->name);
> - goto clk_disable;
> + goto power_off;
> }
> v4l_info(client, "chip found @ 0x%02x (%s)\n",
> client->addr << 1, client->adapter->name);
> @@ -1708,6 +1729,8 @@ static int ov7670_probe(struct i2c_client *client,
> media_entity_cleanup(&info->sd.entity);
> hdl_free:
> v4l2_ctrl_handler_free(&info->hdl);
> +power_off:
> + ov7670_s_power(sd, 0);
> clk_disable:
> clk_disable_unprepare(info->clk);
> return ret;
> @@ -1723,6 +1746,7 @@ static int ov7670_remove(struct i2c_client *client)
> v4l2_ctrl_handler_free(&info->hdl);
> clk_disable_unprepare(info->clk);
> media_entity_cleanup(&info->sd.entity);
> + ov7670_s_power(sd, 0);
> return 0;
> }
>

--
Sakari Ailus
e-mail: sakari.ailus@iki.fi

\
 
 \ /
  Last update: 2017-08-15 18:36    [W:0.159 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site