lkml.org 
[lkml]   [2017]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/3] firmware: qcom: scm: Expose secure IO service
Date
The secure IO service provides operations for reading and writing secure
memory from non-secure mode, expose this API through SCM.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v3:
- None

Changes since v2:
- Picked up Stephen's r-b

Changes since v1:
- Correct scm-call return value handling
- Make scm_io_readl() return data by reference

drivers/firmware/qcom_scm-32.c | 18 ++++++++++++++++++
drivers/firmware/qcom_scm-64.c | 31 +++++++++++++++++++++++++++++++
drivers/firmware/qcom_scm.c | 12 ++++++++++++
drivers/firmware/qcom_scm.h | 6 ++++++
include/linux/qcom_scm.h | 4 ++++
5 files changed, 71 insertions(+)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 93e3b96b6dfa..11fdb1584823 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -596,3 +596,21 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
{
return -ENODEV;
}
+
+int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
+ unsigned int *val)
+{
+ int ret;
+
+ ret = qcom_scm_call_atomic1(QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ, addr);
+ if (ret >= 0)
+ *val = ret;
+
+ return ret < 0 ? ret : 0;
+}
+
+int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
+{
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
+ addr, val);
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 6e6d561708e2..bf50fb59852e 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -439,3 +439,34 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,

return ret;
}
+
+int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
+ unsigned int *val)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+ int ret;
+
+ desc.args[0] = addr;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ,
+ &desc, &res);
+ if (ret >= 0)
+ *val = res.a1;
+
+ return ret < 0 ? ret : 0;
+}
+
+int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = addr;
+ desc.args[1] = val;
+ desc.arginfo = QCOM_SCM_ARGS(2);
+
+ return qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
+ &desc, &res);
+}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index bb16510d75ba..e18d63935648 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -333,6 +333,18 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);

+int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+{
+ return __qcom_scm_io_readl(__scm->dev, addr, val);
+}
+EXPORT_SYMBOL(qcom_scm_io_readl);
+
+int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+{
+ return __qcom_scm_io_writel(__scm->dev, addr, val);
+}
+EXPORT_SYMBOL(qcom_scm_io_writel);
+
/**
* qcom_scm_is_available() - Checks if SCM is available
*/
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 9bea691f30fb..a60e4b9b1394 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -30,6 +30,12 @@ extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
extern void __qcom_scm_cpu_power_down(u32 flags);

+#define QCOM_SCM_SVC_IO 0x5
+#define QCOM_SCM_IO_READ 0x1
+#define QCOM_SCM_IO_WRITE 0x2
+extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned int *val);
+extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
+
#define QCOM_SCM_SVC_INFO 0x6
#define QCOM_IS_CALL_AVAIL_CMD 0x1
extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index e5380471c2cd..e8357f570695 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32 state, u32 id);
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
+extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
+extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
#else
static inline
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
@@ -73,5 +75,7 @@ qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
+static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) { return -ENODEV; }
+static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) { return -ENODEV; }
#endif
#endif
--
2.12.0
\
 
 \ /
  Last update: 2017-08-15 00:50    [W:0.038 / U:0.640 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site