lkml.org 
[lkml]   [2017]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next v2 3/3] ftgmac100: Support NCSI VLAN filtering when available
On Mon, Aug 14, 2017 at 10:59 AM, Samuel Mendoza-Jonas
<sam@mendozajonas.com> wrote:
> Register the ndo_vlan_rx_{add,kill}_vid callbacks and set the
> NETIF_F_HW_VLAN_CTAG_FILTER if NCSI is available.
> This allows the VLAN core to notify the NCSI driver when changes occur
> so that the remote NCSI channel can be properly configured to filter on
> the set VLAN tags.
>
> Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>

I'm not a vlan expert, so I asked why this was only being set when
doing NCSI. The answer was:

> There is no point setting it when not doing ncsi. The HW doesn't have a
> filter in that case (we do have HW vlan tag extraction and injection,
> which my driver supports, but that's different flags).

Reviewed-by: Joel Stanley <joel@jms.id.au>

> ---
> v2: Moved ftgmac100 change into same patch and reordered
>
> drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
> index 34dae51effd4..05fe7123d5ae 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.c
> +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> @@ -1623,6 +1623,8 @@ static const struct net_device_ops ftgmac100_netdev_ops = {
> #ifdef CONFIG_NET_POLL_CONTROLLER
> .ndo_poll_controller = ftgmac100_poll_controller,
> #endif
> + .ndo_vlan_rx_add_vid = ncsi_vlan_rx_add_vid,
> + .ndo_vlan_rx_kill_vid = ncsi_vlan_rx_kill_vid,
> };
>
> static int ftgmac100_setup_mdio(struct net_device *netdev)
> @@ -1837,6 +1839,9 @@ static int ftgmac100_probe(struct platform_device *pdev)
> NETIF_F_GRO | NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_RX |
> NETIF_F_HW_VLAN_CTAG_TX;
>
> + if (priv->use_ncsi)
> + netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
> +
> /* AST2400 doesn't have working HW checksum generation */
> if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
> netdev->hw_features &= ~NETIF_F_HW_CSUM;
> --
> 2.14.0
>

\
 
 \ /
  Last update: 2017-08-14 04:17    [W:0.047 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site