lkml.org 
[lkml]   [2017]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] pinctrl: aspeed: Fix ast2500 strap register write logic
From
Date
Hi Yong,

On Fri, 2017-08-11 at 22:22 +0800, Yong Li wrote:
> On AST2500, the hardware strap register(SCU70) only accepts write ‘1’,
> to clear it to ‘0’, must set bits(write  ‘1’) to SCU7C
>
> > Signed-off-by: Yong Li <sdliyong@gmail.com>
> ---
>  drivers/pinctrl/aspeed/pinctrl-aspeed.c | 20 ++++++++++++++++++--
>  drivers/pinctrl/aspeed/pinctrl-aspeed.h |  1 +
>  2 files changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> index a86a4d6..9d2b2e9 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> @@ -183,6 +183,7 @@ static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
>  {
> >   int ret;
> >   int i;
> > + unsigned int rev_id;
>  
> >   for (i = 0; i < expr->ndescs; i++) {
> >   const struct aspeed_sig_desc *desc = &expr->descs[i];
> @@ -213,8 +214,23 @@ static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> >   if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP2)
> >   continue;
>  
> > - ret = regmap_update_bits(maps[desc->ip], desc->reg,
> > -  desc->mask, val);
> > + /* On AST2500, Set bits in SCU7C are cleared from SCU70 */
> > + if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP1 &&
> + val == 0) {

The AST2500 strapping register contains several multi-bit bit-fields.
Currently we know we'll only reach this test if we're modifying the
GPIO passthrough bits for bank D and E (bits 21 and 22 respectively),
so the 'val == 0' test is functional but I wonder if we shouldn't be
more flexible. If we're more flexible here then we may only need to
modify the strap register test above this hunk to change the behaviour,
rather than needing to rework your additions here as well. More on this
below.

> + ret = regmap_read(maps[ASPEED_IP_SCU],
> > + HW_REVISION_ID, &rev_id);
> > + if (ret < 0)
> > + return ret;
> +
> > + if (0x04 == ((rev_id >> 24) & 0xff))
> > + ret = regmap_update_bits(maps[desc->ip],
> + HW_REVISION_ID, desc->mask, desc->mask);

regmap_update_bits() will do a read-modify-write operation whilst only
taking the regmap lock once, making the modification atomic. However,
HW_REVISION_ID is a W1C (write 1 to clear) register associated with
SCU70, so we don't actually need the read operation under the lock. We
can simply use regmap_write() here.

Addressing my comment on 'val == 0' above, I think we can remove that
test if we instead write this as:

ret = regmap_write(maps[ desc->ip], HW_REVISION_ID, (~val & desc->mask));

That way if we ever expand the HW_STRAP1 capabilites to cover the
bitfields (e.g. maybe we want to be able to dynamically switch SPI into
debug mode) the code should (hopefully) just work.

Cheers,

Andrew

> + else
> > + ret = regmap_update_bits(maps[desc->ip],
> > + desc->reg, desc->mask, val);
> > + } else
> + ret = regmap_update_bits(maps[desc->ip], desc->reg,
> > + desc->mask, val);
>  
> >   if (ret)
> >   return ret;
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> index fa125db..d4d7f03 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> @@ -251,6 +251,7 @@
>  #define SCU3C           0x3C /* System Reset Control/Status Register */
>  #define SCU48           0x48 /* MAC Interface Clock Delay Setting */
>  #define HW_STRAP1       0x70 /* AST2400 strapping is 33 bits, is split */
> +#define HW_REVISION_ID  0x7C /* Silicon revision ID register */
>  #define SCU80           0x80 /* Multi-function Pin Control #1 */
>  #define SCU84           0x84 /* Multi-function Pin Control #2 */
>  #define SCU88           0x88 /* Multi-function Pin Control #3 */[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-08-14 02:54    [W:0.039 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site