lkml.org 
[lkml]   [2017]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v2] hwmon:(stts751) buffer overread on wrong chip configuration
On Thu, Aug 10, 2017 at 07:46:32PM +0300, Anton Vasilyev wrote:
> If stts751 hw by some reason reports conversion rate bigger then 9:
> ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
> then dereference stts751_intervals[priv->interval] leads to buffer
> overread.
>
> The path adds sanity check for value stored on chip.
>
> Found by Linux Driver Verification project (linuxtesting.org).
>
> Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>

Applied (after s/path/patch/)

Thanks,
Guenter

> ---
> v2: Fixed Guenter's remark about comparison
> ---
> drivers/hwmon/stts751.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/hwmon/stts751.c b/drivers/hwmon/stts751.c
> index d56251d..3f940fb 100644
> --- a/drivers/hwmon/stts751.c
> +++ b/drivers/hwmon/stts751.c
> @@ -718,6 +718,10 @@ static int stts751_read_chip_config(struct stts751_priv *priv)
> ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
> if (ret < 0)
> return ret;
> + if (ret >= ARRAY_SIZE(stts751_intervals)) {
> + dev_err(priv->dev, "Unrecognized conversion rate 0x%x\n", ret);
> + return -ENODEV;
> + }
> priv->interval = ret;
>
> ret = stts751_read_reg16(priv, &priv->event_max,

\
 
 \ /
  Last update: 2017-08-13 15:36    [W:0.057 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site