lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 1/2] dt-bindings: mtd: Altera ASMI Parallel II IP Core
    On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerlach@linux.intel.com wrote:
    > From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
    >
    > Device Tree bindinds for Altera ASMI Parallel II IP Core.

    s/bindinds/bindings/

    >
    > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
    > ---
    > .../devicetree/bindings/mtd/altera-asmip2.txt | 22 ++++++++++++++++++++++
    > 1 file changed, 22 insertions(+)
    > create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt
    >
    > diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
    > new file mode 100644
    > index 0000000..3380366
    > --- /dev/null
    > +++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
    > @@ -0,0 +1,22 @@
    > +* Altera ASMI Parallel II IP Core
    > +
    > +Required properties:
    > +- compatible : Should be "altr,asmi_parallel2".

    s/_/-/

    > +- reg : A tuple consisting of a physical address and length.
    > +
    > +Optional subnodes:
    > +Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.

    But this is not a general purpose SPI controller?

    > +- reg : chip select value
    > +- label : optional user friendly label
    > +
    > +Example:
    > +
    > +qspi: spi@a0001000 {
    > + compatible = "altr,asmi_parallel2";
    > + reg = <0xa0001000 0x10>;
    > +
    > + flash@0 {

    This should have a compatible.

    > + reg = <0>;
    > + label = "FPGA Image";
    > + };
    > +};
    > --
    > 2.7.4
    >

    \
     
     \ /
      Last update: 2017-08-10 22:35    [W:2.674 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site