[lkml]   [2017]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [alsa-devel] [PATCH v2 2/2] drm/bridge: adv7511: restrict audio sample sizes

On 01/08/17 13:28, Mark Brown wrote:
> On Tue, Aug 01, 2017 at 01:24:03PM +0100, Srinivas Kandagatla wrote:
>> On 01/08/17 09:42, Arnaud Pouliquen wrote:
>>> On 08/01/2017 12:49 AM, wrote:
>>> I already used ADV7513 and i did not observe this limitation.
>>> I had a look to ADV7533 data-sheet. it should support 32 and 64 bits I2S
>> ADV7511_REG_AUDIO_CFG3(0x14) register definition in datasheet and the code
>> in this driver suggest that It only supports 16Bit and 24Bit samples.
> The amount of data it pays attention to in the frame is not the same as
> the size of the frame.
I agree.

>>> format bus, with 16 or 24 bits precision sample. So it should support
>>> As example, if you configure bus in Left justified format with 24 bits
>>> sample length, 32 bits application samples should be truncated to 24
>>> bits samples at ADV7533 I2S interface level (LSB dropped).
>> May be we can do that to make the user happy but isn't this just truncate
>> the resolution to 24Bit then?
>> And it's a false indication that we are supporting 32bit samples.
>> Which am not very happy with.
> This is what the sample_bits field in the DAI structure is for.ya.
But still reporting that driver supports 32 bit samples when it does not
really support all 32 bits, is kinda misleading to user.
Isn't it?

And the driver would be end up with hacked up code for each case.



 \ /
  Last update: 2017-08-01 14:53    [W:0.057 / U:2.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site