[lkml]   [2017]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next v2 00/11] net: dsa: rework EEE support
From: Vivien Didelot <>
Date: Tue, 1 Aug 2017 16:32:30 -0400

> EEE implies configuring the port's PHY and MAC of both ends of the wire.
> The current EEE support in DSA mixes PHY and MAC configuration, which is
> bad because PHYs must be configured through a proper PHY driver. The DSA
> switch operations for EEE are only meant for configuring the port's MAC,
> which are integrated in the Ethernet switch device.
> This patchset fixes the EEE support in qca8k driver, makes the DSA layer
> call phy_init_eee for all drivers, and remove the EEE support from the
> mv88e6xxx driver since the Marvell PHY driver should be enough for it.
> Changes in v2:
> - make PHY device and DSA EEE ops mandatory for slave EEE operations.
> - simply return 0 in drivers which don't need to do anything to
> configure the port' MAC. Subsequent PHY calls will be enough.

Series applied, thanks Vivien.

 \ /
  Last update: 2017-08-02 05:10    [W:0.100 / U:0.424 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site