lkml.org 
[lkml]   [2017]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems
From
Date
On Thu, 2017-07-06 at 21:41 +1000, Tom Lanyon wrote:
> Sorry for the slow response - I've just had a chance to run some more
> tests.
>
> I tried to disable the SD card reader in the BIOS as suggested
> earlier
> in the thread, but that didn't seem to make a significant change.
> More inline below.
>
> On Tue, 2017-06-27 at 17:03 +0200, Rafael J. Wysocki wrote:
> >
> > I would carry out s2idle under turbostat to see how much PC10
> > residency is there while suspended.  That may be a significant
> > factor.
> >
> > Most likely there is a device preventing the SoC from reaching its
> > deepest low-power states under Linux on your system and it needs to
> > be
> > identified and dealt with.
> I'm not entirely sure how turbostat records metrics so wasn't sure
> how
> to measure correctly.  I kept turbostat running while performing a
> s2idle and recorded the output:
>
> https://gist.githubusercontent.com/tomlanyon/3238e742a155e7fa27658aa0
> 960bdee4/raw/98b5f050e5eb2f88af47b2afd17080e7dd85d20f/turbostat
>
> I'm not familiar with the output format - I see some high percentages
> of C10, but nothing in Pkg%pc10. Which is of interest in this
> scenario?
I see that you do have Pkg%pc10 of 86.56 in one interval. The system
was in Pkg%pc8 for multiple intervals before Pkg%pc10. So can you try
this also before your test?

# cd /sys/kernel/debug/pmc_core
# for i in {0..32}; do echo $i > ltr_ignore; done

Thanks,
Srinivas

>
> On 28 June 2017 at 02:14, Srinivas Pandruvada
> <srinivas.pandruvada@linux.intel.com> wrote:
> >
> > Also make sure that you have no FW loading error for i915.
> > #dmesg | grep i915
> > It will display that Guc FW was loaded etc..
> > The latest FW can be downloaded from
> > https://01.org/linuxgraphics/downloads/firmware
> >
> > If you don't see PC10 residency, we can try something more.
> I've confirmed that there's no FW errors for the i915.

\
 
 \ /
  Last update: 2017-07-07 02:39    [W:0.118 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site