lkml.org 
[lkml]   [2017]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/9] clk: at91: clk-generated: make gclk determine audio_pll rate
On 06/07/2017 at 17:29:22 +0200, Nicolas Ferre wrote:
> > + /*
> > + * The audio_pll rate can be modified, unlike the five others clocks
> > + * that should never be altered.
> > + * The audio_pll can technically be used by multiple consumers. However,
> > + * with the rate locking, the first consumer to enable to clock will be
> > + * the one definitely setting the rate of the clock.
> > + * Since audio IPs are most likely to request the same rate, we enforce
> > + * that the only clks able to modify gck rate are those of audio IPs.
> > + */
> > +
> > + if (gck->id != GCK_ID_SSC0 && gck->id != GCK_ID_SSC1 &&
> > + gck->id != GCK_ID_I2S0 && gck->id != GCK_ID_I2S1 &&
> > + gck->id != GCK_ID_CLASSD)
> > + goto end;
>
> ...well... maybe for a temporary solution, but what about the next
> product that will also have such feature but without the same set of IDs?
>

It will have a different compatible and that can be used to encode the
difference.

> I know that the main use of this clock is the "audio" subsystem (so its
> name) but in a machine without audio needs, it can be interesting to use
> this fractional PLL for other devices that can handle a GCK (and I'm
> thinking about the SDHCI interface that then could be configured with
> maximum clock speed).
>
> > + parent = clk_hw_get_parent_by_index(hw, GCK_INDEX_DT_AUDIO_PLL);
> > + if (!parent)
> > + goto end;
>
> Here, if the audio pll id changes in the DT, we don't retrieve the
> proper parent... And again, not very future proof.
>

One more reason to remove all the crap we have in the DT, as suggested
by RobH.


--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2017-07-06 18:10    [W:0.071 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site