[lkml]   [2017]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/4] thermal: imx: Add nvmem-cells binding on imx6sx
On imx6sx accessing OCOTP directly is wrong because the ocotp clock needs to be
enabled first. Fix this by adding a nvmem-cells binding and using it on imx6sx,
imx6ul and imx6ull.

The existing binding is kept around because it works fine on imx6qdl.

This was initially reported by Lothar Waßmann <> in reply
to a mail adding imx6ul/ull support:


A previous attempt just reinterpreted the fsl,tempmon-data phandle as nvmem.
Code was actually written to use nvmem-cells first but I thought that
reinterpreting existing devicetree properties would be interesting.


Leonard Crestez (4):
thermal: imx: Add nvmem-cells alternate binding for OCOTP access
thermal: imx: Add support for reading OCOTP through nvmem
ARM: dts: imx6sx: Use nvmem-cells for tempmon
ARM: dts: imx6ul: Add imx6ul-tempmon

.../devicetree/bindings/thermal/imx-thermal.txt | 7 ++
arch/arm/boot/dts/imx6sx.dtsi | 11 +-
arch/arm/boot/dts/imx6ul.dtsi | 17 +++
drivers/thermal/imx_thermal.c | 131 ++++++++++++++++-----
4 files changed, 135 insertions(+), 31 deletions(-)


 \ /
  Last update: 2017-07-06 15:21    [W:0.075 / U:0.296 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site