lkml.org 
[lkml]   [2017]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] serial: imx: Fix imx_shutdown procedure
Date
From: Nandor Han <nandor.han@ge.com>

In some cases, it looks that interrupts can happen after the dma was
disabled and port was not yet shutdown. This will result in interrupts
handled by imx_rxint.

This commits updates the shutdown function to ensure that underlying
components are disabled in the right order. This disables RX and TX
blocks, then it disabled interrupts. In case DMA is enabled, it disables
DMA and free corresponding resources. It disables UART port and stop
clocks.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
---
drivers/tty/serial/imx.c | 34 +++++++++++++++-------------------
1 file changed, 15 insertions(+), 19 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d35112f..bfe7180 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1396,44 +1396,40 @@ static void imx_shutdown(struct uart_port *port)
unsigned long temp;
unsigned long flags;

- if (sport->dma_is_enabled) {
- sport->dma_is_rxing = 0;
- sport->dma_is_txing = 0;
- dmaengine_terminate_sync(sport->dma_chan_tx);
- dmaengine_terminate_sync(sport->dma_chan_rx);
-
+ if (!sport->port.suspended) {
spin_lock_irqsave(&sport->port.lock, flags);
imx_stop_tx(port);
imx_stop_rx(port);
- imx_disable_dma(sport);
+
+ if (sport->dma_is_inited && sport->dma_is_enabled)
+ imx_disable_dma(sport);
+
spin_unlock_irqrestore(&sport->port.lock, flags);
imx_uart_dma_exit(sport);
}

- mctrl_gpio_disable_ms(sport->gpios);
-
spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_TXEN);
+ temp &= ~(UCR2_TXEN | UCR2_RXEN);
writel(temp, sport->port.membase + UCR2);
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~UCR4_OREN;
+ writel(temp, sport->port.membase + UCR4);
spin_unlock_irqrestore(&sport->port.lock, flags);

- /*
- * Stop our timer.
- */
- del_timer_sync(&sport->timer);
+ mctrl_gpio_disable_ms(sport->gpios);

- /*
- * Disable all interrupts, port and break condition.
- */
+ /* Stop our timer. */
+ del_timer_sync(&sport->timer);

+ /* Disable port. */
spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
-
+ temp &= ~UCR1_UARTEN;
writel(temp, sport->port.membase + UCR1);
spin_unlock_irqrestore(&sport->port.lock, flags);

+ /* Disable clocks. */
clk_disable_unprepare(sport->clk_per);
clk_disable_unprepare(sport->clk_ipg);
}
--
1.8.3.1
\
 
 \ /
  Last update: 2017-07-05 15:08    [W:0.092 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site