lkml.org 
[lkml]   [2017]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v1 1/6] dma: fsl-dma: add devicetree documentation for qdma driver.
Date
Redraw this patch, thanks.
Jiaheng

-----Original Message-----
From: jiaheng.fan [mailto:jiaheng.fan@nxp.com]
Sent: Tuesday, August 01, 2017 9:47 AM
To: vinod.koul@intel.com; robh+dt@kernel.org; dan.j.williams@intel.com; mark.rutland@arm.com; linux@armlinux.org.uk; shawnguo@kernel.org
Cc: Leo Li <leoyang.li@nxp.com>; dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Jiafei Pan <jiafei.pan@nxp.com>; Jiaheng Fan <jiaheng.fan@nxp.com>
Subject: [PATCH v1 1/6] dma: fsl-dma: add devicetree documentation for qdma driver.

signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
---
Documentation/devicetree/bindings/dma/fsl-qdma.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt

diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
new file mode 100644
index 0000000..b076177
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -0,0 +1,42 @@
+* Freescale queue Direct Memory Access Controller(qDMA) Controller
+
+ The qDMA controller transfers blocks of data between one source and
+one or more destinations. The blocks of data transferred can be
+represented in memory as contiguous or non-contiguous using
+scatter/gather table(s). Channel virtualization is supported through
+enqueuing of DMA jobs to, or dequeuing DMA jobs from, different work queues.
+
+* qDMA Controller
+Required properties:
+- compatible :
+ - "fsl,ls1021a-qdma",
+ Or "fsl,ls1043a-qdma" followed by "fsl,ls1021a-qdma",
+- reg : Specifies base physical address(s) and size of the qDMA registers.
+ The region is qDMA control register's address and size.
+- interrupts : A list of interrupt-specifiers, one for each entry in
+ interrupt-names.
+- interrupt-names : Should contain:
+ "qdma-error" - the error interrupt
+ "qdma-queue" - the queue interrupt
+- channels : Number of channels supported by the controller
+- queues : Number of queues supported by driver
+
+Optional properties:
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+
+Examples:
+
+ qdma: qdma@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8398000 0x0 0x2000 /* Controller registers */
+ 0x0 0x839a000 0x0 0x2000>; /* Block registers */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ channels = <8>;
+ queues = <2>;
+ big-endian;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2017-08-01 04:04    [W:0.412 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site