lkml.org 
[lkml]   [2017]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/5] ARC: DTS: Add device-tree for Anarion-based development board
From
Date
On 07/30/2017 11:32 PM, Vineet Gupta wrote:
> On 07/29/2017 03:37 AM, Alexandru Gagniuc wrote:
>> Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
>> ---
>> arch/arc/boot/dts/adaptrum_anarion.dtsi | 107
>> ++++++++++++++++++++++++++++
>> arch/arc/boot/dts/adaptrum_anarion_fpga.dts | 49 +++++++++++++
>> 2 files changed, 156 insertions(+)
>> create mode 100644 arch/arc/boot/dts/adaptrum_anarion.dtsi
>> create mode 100644 arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>
> So you really need to upstream the fpga dts - if this just for initial
> bringup and you will eventually switch to silicon.
> The reason I say is every additional file is a maintenance burden so
> better to avoid things which are only temporary.
> But if you plan to support this config in long run I'm fine !
>
> Looking further it seems first one is a "common" include style dts while
> fpga is for actual platform and the SoC one will follow once you get it
> running ?

That is correct. the '_fpga.dts' is the tree for the current emulation
board. The plan is to use the fpga platform until the actual silicon
arrives and is brought up. I included the _fpga dts in order to have a
way to verify that the anarion DTSI compiles. I also plan to later
remove the fpga dts once the actual silicon works.

[snip]

>> +#include "skeleton.dtsi"
>
> Perhaps put a one liner that this is based on SNPS ARC700 cpu !

Staged for [PATCH v2].

Alex

>> +
>> +/ {
>> + compatible = "adaptrum,anarion";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + device_type = "soc";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + interrupt-parent = <&core_intc>;
>> +
>> + core_intc: interrupt-controller {
>> + compatible = "snps,arc700-intc";
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> + };
>> +
>> + uart0: serial@f2202100 {
>> + compatible = "ns16550";
>> + reg = <0xf2202100 0x20>;
>> + interrupts = <8>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <192000000>;
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial@f2202200 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0xf2202200 0x20>;
>> + interrupts = <8>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <192000000>;
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial@f2202300 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0xf2202300 0x20>;
>> + interrupts = <8>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <192000000>;
>> + status = "disabled";
>> + };
>> +
>> + uart3: serial@f2202400 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0xf2202400 0x20>;
>> + interrupts = <8>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <192000000>;
>> + status = "disabled";
>> + };
>> +
>> + qspi: qspi@f200f000 {
>> + compatible = "adaptrum,anarion-qspi";
>> + reg = <0xf200f000 0x1000>,
>> + <0x20000000 0x08000000>;
>> +
>> + interrupts = <10>;
>> + status = "disabled";
>> + };
>> +
>> + gmac0: ethernet@f2010000 {
>> + compatible = "snps,dwmac";
>> + reg = <0xf2010000 0x4000>;
>> +
>> + interrupt-parent = <&core_intc>;
>> + interrupts = <20>;
>> + interrupt-names = "macirq";
>> +
>> + clocks = <&core_clk>;
>> + clock-names = "stmmaceth";
>> +
>> + snps,pbl = <32>;
>> + status = "disabled";
>> + };
>> +
>> + gmac1: ethernet@f2014000 {
>> + compatible = "adaptrum,anarion-gmac", "snps,dwmac";
>> + reg = <0xf2014000 0x4000>, <0xf2018100 8>;
>> +
>> + interrupt-parent = <&core_intc>;
>> + interrupts = <21>;
>> + interrupt-names = "macirq";
>> +
>> + clocks = <&core_clk>;
>> + clock-names = "stmmaceth";
>> +
>> + snps,pbl = <32>;
>> + status = "disabled";
>> + };
>> + };
>> +};
>> diff --git a/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>> b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>> new file mode 100644
>> index 0000000..36173b2
>> --- /dev/null
>> +++ b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>> @@ -0,0 +1,49 @@
>> +/*
>> + * (C) Copyright 2017 Adaptrum, Inc.
>> + * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
>> + * Licensed under the GPLv2 or (at your option) any later version
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "adaptrum_anarion.dtsi"
>> +
>> +/ {
>> + model = "adaptrum,anarion";
>> + compatible = "adaptrum,anarion";
>> +
>> + chosen {
>> + bootargs = "earlycon console=ttyS0,115200n8";
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + core_clk: core_clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-frequency = <12000000>;
>> + };
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> +
>> +&qspi {
>> + status = "okay";
>> + flash0: w25q128fvn@0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "winbond,w25q128", "jedec,spi-nor";
>> + spi-max-frequency = <70000000>;
>> + m25p,fast-read;
>> + };
>> +};
>> +
>> +&gmac1 {
>> + phy-mode = "rgmii";
>> + status = "okay";
>> +};
>

\
 
 \ /
  Last update: 2017-07-31 17:09    [W:0.094 / U:1.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site