lkml.org 
[lkml]   [2017]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 1/2] power: supply: twl4030-charger: move irq allocation to just before irqs are enabled
Date
And initialize workers and notifiers as soon as possible.

This avoids a potential race if irqs are enabled and triggered too early
before the worker is properly set up.

Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
drivers/power/supply/twl4030_charger.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index 1fbbe0cc216a..fde6f07ba8c3 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -984,12 +984,27 @@ static int twl4030_bci_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, bci);

+ INIT_WORK(&bci->work, twl4030_bci_usb_work);
+ INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
+
bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac");
if (IS_ERR(bci->channel_vac)) {
bci->channel_vac = NULL;
dev_warn(&pdev->dev, "could not request vac iio channel");
}

+ if (bci->dev->of_node) {
+ struct device_node *phynode;
+
+ phynode = of_find_compatible_node(bci->dev->of_node->parent,
+ NULL, "ti,twl4030-usb");
+ if (phynode) {
+ bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+ bci->transceiver = devm_usb_get_phy_by_node(
+ bci->dev, phynode, &bci->usb_nb);
+ }
+ }
+
bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
NULL);
if (IS_ERR(bci->ac)) {
@@ -1023,20 +1038,6 @@ static int twl4030_bci_probe(struct platform_device *pdev)
return ret;
}

- INIT_WORK(&bci->work, twl4030_bci_usb_work);
- INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
-
- bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
- if (bci->dev->of_node) {
- struct device_node *phynode;
-
- phynode = of_find_compatible_node(bci->dev->of_node->parent,
- NULL, "ti,twl4030-usb");
- if (phynode)
- bci->transceiver = devm_usb_get_phy_by_node(
- bci->dev, phynode, &bci->usb_nb);
- }
-
/* Enable interrupts now. */
reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
TWL4030_TBATOR1 | TWL4030_BATSTS);
--
2.12.2
\
 
 \ /
  Last update: 2017-07-03 18:39    [W:1.229 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site