lkml.org 
[lkml]   [2017]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] ARM: dts: keystone-k2l: Add DSP nodes
Date
The Keystone 2 66AK2L SoCs have 4 TMS320C66x DSP Core Subsystems
(C66x CorePacs), each with a 1.0 GHz or 1.2 GHz C66x Fixed /
Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB
L2 SRAM. Add the DT nodes for these DSP processor sub-systems.
The processors do not have an MMU, and use various IPC Generation
registers and shared memory for inter-processor communication.
The aliases with a stem 'rproc' have also been added for all the
DSPs, they provide a fixed remoteproc id to each DSP processor.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/boot/dts/keystone-k2l.dtsi | 71 +++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 148650406cf7..4431310bc922 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -33,6 +33,13 @@
};
};

+ aliases {
+ rproc0 = &dsp0;
+ rproc1 = &dsp1;
+ rproc2 = &dsp2;
+ rproc3 = &dsp3;
+ };
+
soc {
/include/ "keystone-k2l-clocks.dtsi"

@@ -268,6 +275,70 @@
gpio,syscon-dev = <&devctrl 0x24c>;
};

+ dsp0: dsp@10800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ dsp1: dsp@11800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x11800000 0x00100000>,
+ <0x11e00000 0x00008000>,
+ <0x11f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem1>;
+ ti,syscon-dev = <&devctrl 0x848>;
+ resets = <&pscrst 1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <1 9>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio1 27 0>;
+ status = "disabled";
+ };
+
+ dsp2: dsp@12800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x12800000 0x00100000>,
+ <0x12e00000 0x00008000>,
+ <0x12f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem2>;
+ ti,syscon-dev = <&devctrl 0x84c>;
+ resets = <&pscrst 2>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <2 10>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio2 27 0>;
+ status = "disabled";
+ };
+
+ dsp3: dsp@13800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x13800000 0x00100000>,
+ <0x13e00000 0x00008000>,
+ <0x13f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem3>;
+ ti,syscon-dev = <&devctrl 0x850>;
+ resets = <&pscrst 3>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <3 11>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio3 27 0>;
+ status = "disabled";
+ };
+
mdio: mdio@26200f00 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
--
2.13.1
\
 
 \ /
  Last update: 2017-07-29 01:21    [W:0.060 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site