lkml.org 
[lkml]   [2017]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net] xgene: Don't fail probe, if there is no clk resource for SGMII interfaces
From
Date
On 07/27/2017 02:39 PM, Tom Bogendoerfer wrote:
> On Thu, Jul 27, 2017 at 02:03:42PM -0700, Laura Abbott wrote:
>> This change causes boot failures for me on my APM Mustang system running
>> Fedora rawhide:
>>
>> [ 16.669089] Synchronous External Abort: synchronous external abort (0x9600000
>> [ 16.669099] Internal error: : 96000010 [#1] SMP
>> [ 16.669103] Modules linked in: xgene_enet(+) at803x realtek mdio_xgene xgenes
>> [ 16.669127] CPU: 2 PID: 534 Comm: systemd-udevd Not tainted 4.13.0-0.rc1.git1
>> [ 16.669128] Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang 6
>> [ 16.669131] task: ffff8003e6f8ce00 task.stack: ffff8003e4fd8000
>> [ 16.669144] PC is at xgene_enet_wr_mac+0xa0/0x128 [xgene_enet]
>> [ 16.669152] LR is at xgene_enet_wr_mac+0x64/0x128 [xgene_enet]
>
> on the first glance I don't see anything clock related there.
>

I don't know the intricacies of the Mustang hardware but external
aborts have been a symptom of missing clocks on other hardware.

> What firmware version is installed on your mustang board ? I saw
> ethernet related crashes with mustang boards because the device tree
> in firmware was too old for the xgene ethernet driver.
>
> Thoms.
>

TianoCore 3.06.12 UEFI 2.4.0 Aug 12 2016 13:30:51
CPU: APM ARM 64-bit Potenza Rev B0 2400MHz PCP 2400MHz
32 KB ICACHE, 32 KB DCACHE
SOC 2000MHz IOBAXI 400MHz AXI 250MHz AHB 200MHz GFC 125MHz
Board: X-Gene Mustang Board
Little Endian build
Slimpro FW:
Ver: 3.5 (build 03.06.12.00 2016/08/12)
PMD: 1000 mV
SOC: 950 mV


Thanks,
Laura

\
 
 \ /
  Last update: 2017-07-28 00:40    [W:0.080 / U:3.728 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site