lkml.org 
[lkml]   [2017]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 5/6] dt-bindings: Document devicetree binding for ARM DSU PMU
+DT list

On Thu, Jul 27, 2017 at 10:10 AM, Suzuki K Poulose
<suzuki.poulose@arm.com> wrote:
> This patch documents the devicetree bindings for ARM DSU PMU.
>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Rob Herring <robh@kernel.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> .../devicetree/bindings/arm/arm-dsu-pmu.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
> new file mode 100644
> index 0000000..b9935ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
> @@ -0,0 +1,27 @@
> +* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
> +
> +ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
> +with a shared L3 memory system, control logic and external interfaces to
> +form a multicore cluster. The PMU enables to gather various statistics on
> +the operations of the DSU. The PMU provides independent 32bit counters that
> +can count any of the supported events, along with a 64bit cycle counter.
> +The PMU is accessed via CPU system registers and has no MMIO component.
> +
> +** DSU PMU required properties:
> +
> +- compatible : should be one of :
> +
> + "arm,dsu-pmu"

Seems kind of generic. There's only one flavor is DSU?

> +
> +- interrupts : Exactly 1 SPI must be listed.
> +
> +- cpus : List of phandles for the CPUs connected to this DSU instance.
> +
> +
> +** Example:
> +
> +dsu_pmu@0 {

Don't use "_" in node names and unit-address is not valid without a
reg property.

> + compatible = "arm,dsu-pmu";
> + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
> + cpus = <&cpu_0>, <&cpu_1>;
> +};
> --
> 2.7.5
>

\
 
 \ /
  Last update: 2017-07-27 17:53    [W:0.082 / U:0.088 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site