lkml.org 
[lkml]   [2017]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 9/9] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board
From
Date


On 05/25/2017 06:02 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Add support for the Bananapi R2 (BPI-R2) development board from
> BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
> found on http://www.banana-pi.org/r2.html
>
> The patch currently only adds Mediatek GMAC, MT7530 Switch, the crypto
> engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and
> PMIC LEDs. As to the other missing hardware and peripherals, they would
> be added and integrated continuously.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek.txt | 2 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 440 +++++++++++++++++++++
> 3 files changed, 443 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
>
[...]
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> new file mode 100644
> index 0000000..72c7984
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
[...]
> +
> +&eth {
> + status = "okay";
> + gmac0: mac@0 {
> + compatible = "mediatek,eth-mac";
> + reg = <0>;
> + phy-mode = "trgmii";
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + pause;
> + };
> + };
> +
> + mdio: mdio-bus {
> + switch@0 {
> + compatible = "mediatek,mt7530";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;

What is this reg needed for? I can't find it neither in the code nor in the
bindings (mt7530 and general dsa bindings). Actually it throws a warning when
compiling:
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning (reg_format): "reg"
property in /ethernet@1b100000/mdio-bus/switch@0 has invalid length (4 bytes)
(#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/ethernet@1b100000/mdio-bus/switch@0
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/ethernet@1b100000/mdio-bus/switch@0

Regards,
Matthias

\
 
 \ /
  Last update: 2017-07-27 16:48    [W:0.184 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site